Mobile QR Code QR CODE

Journal of the Korea Concrete Institute

J Korea Inst. Struct. Maint. Insp.
  • Indexed by
  • Korea Citation Index (KCI)

Journal Search

  1. Home
  2. All Issues
  3. 2023-08 (Vol.27 No.4)
  4. 10.11112/jksmi.2023.27.4.78
XML PDF INFO REF

References

1 
Seo, J. S., Kim, H. J., and Kim, Y. Y. (2022), Performance Evaluation of Cement Composite Using Multi-Component Binder for Artificial Reef Produced by 3D Printer, Journal of the Korea Institute for Structural Maintenance and Inspection, 26(6), 139-147 (in Korean).URL
2 
Moelich, G. M., Kruger, J., and Combrinck, R. (2020), Plastic shrinkage cracking in 3D printed concrete, Composites Part B: Engineering, 200, 108313.DOI
3 
Zhao, H., Ma, Y., Zhang, J., Hu, Z., Li, H., Wang, Y., and Li, Z. (2022), Effect of clay content on plastic shrinkage cracking of cementitious materials, Construction and Building Materials, 342, 127989.DOI
4 
Won, J. P., Hwang, K. S., and Park, C. G. (2005), Mechanical and Early Shrinkage Crack of Hydrophilic PVA Fiber Reinforced Concrete with Fiber Volume Fraction and Fiber Length, Journal of Civil and Environmental Engineering Research, 25(1A), 133-142.URL
5 
Moelich, G. M., Kruger, P. J., and Combrinck, R. (2022), Mitigating early age cracking in 3D printed concrete using fibres, superabsorbent polymers, shrinkage reducing admixtures, B-CSA cement and curing measures, Cement and Concrete Research, 159, 106862.DOI
6 
Yang, J., Wang, R., and Zhang, Y. (2020), Influence of dually mixing with latex powder and polypropylene fiber on toughness and shrinkage performance of overlay repair mortar, Construction and Building Materials, 261, 120521.DOI
7 
Akindahunsi, A. A., and Uzoegbo, H. C. (2015), Strength and durability properties of concrete with starch admixture, International Journal of Concrete Structures and Materials, 9(3), 323-335.DOI
8 
Souza, M. T., Ferreira, I. M., Moraes, E. G., Senff, L., and Oliveira, A. P. N. (2020), 3D printed concrete for large-scale buildings: An overview of rheology, printing parameters, chemical admixtures, reinforcements, and economic and environmental prospects, Journal of Building Engineering, 32, 101833.DOI
9 
Shanmugavel, D., Selvaraj, T., Ramadoss, R., and Raneri, S. (2020), Interaction of a viscous biopolymer from cactus extract with cement paste to produce sustainable concrete, Construction and Building Materials, 257, 119585.DOI
10 
Martinez-Molina, W., Torres-Acosta, A. A., Martínez-Peña, G. I., Guzmán, E. A., and Mendoza-Pérez, I. N. (2015), Cement-based, materials-enhanced durability from opuntia ficus indica mucilage additions, ACI Materials Journal, 112(1), 165.URL
11 
Vieyra, H., Figueroa-López, U., Morales, A. G., V-porras, B., M-Martinez, E. S., and A-Mendez, M. A. (2015), Optimized Monitoring of Production of Cellulose Nanowhiskersfrom Opuntiaficus-indica (NopalCactus), International Journal of Polymer Science, Research Article.DOI
12 
Kim, H. J., Kown, K. S., Lee, K. Y., Lee, G. J., and Kim, Y. Y. (2020), Fresh and Strength Properties of Mortar Produced with Recycled Cactus Stem Powder, Journal of the Korean Recycled Construction Resources Institute, 8(3), 365-371 (in Korean).DOI
13 
Xiao, J., Liu, H., and Ding, T. (2021), Finite element analysis on the anisotropic behavior of 3D printed concrete under compression and flexure, Additive Manufacturing, 39, 101712.DOI
14 
El Cheikh, K., Rémond, S., Khalil, N., and Aouad, G. (2017), Numerical and experimental studies of aggregate blocking in mortar extrusion, Construction and Building Materials, 145, 452-463.DOI
15 
Seo, J. S., Hyun, C. J., and Kim, Y. Y. (2022), Effect of polymer post-treatment on the durability of 3D-printed cement composites, Journal of the Korea Institute for Structural Maintenance and Inspection, 26(5), 20-29 (in Korean).URL
16 
Han, C. G., Han, M. C., Yoon, C. W., and Sim, B.K. (2002), Setting and Mechanical Properties of Concrete Using Saccharic Type Super Retarding Agent, Journal of the Korea Concrete Institute, 14(4), 589-596.URL
17 
Na, S. H., Kang, H. J., Song, Y. J., and Song, M. S. (2010), Effect of superplasticizer on the early hydration ordinary potland cement, Journal of the Korean Ceramic Society, 47(5), 387-393 (in Korean).URL
18 
Lee, G., Han, D., Han, M. C., Han, C. G., and Son, H. J. (2012), Combining polypropylene and nylon fibers to optimize fiber addition for spalling protection of high-strength concrete, Construction and Building Materials, 34, 313-320.DOI
19 
Mohan, M. K., Rahul, A. V., De Schutter, G., and Van Tittelboom, K. (2021), Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review, Cement and Concrete Composites, 115, 103855.DOI
20 
Chandra, S., Eklund, L., and Villarreal, R. R. (1998), Use of Cactus in Mortars and Concrete, Cement and Concrete Research, 28(1), 41-51.DOI
21 
Yoo, J. C., Kim, G. Y., Lee, S. K., Hwang, E. C., and Nam, J. S. (2019), Effect of Polypropylene Fiber on the Freeze-Thaw Damage of Mortar, Journal of the Korean Recycled Construction Resources Institute, 7(4), 438-444 (in Korean).DOI