Mobile QR Code QR CODE

Journal of the Korea Concrete Institute

J Korea Inst. Struct. Maint. Insp.
  • Indexed by
  • Korea Citation Index (KCI)

Journal Search

  1. Home
  2. All Issues
  3. 2026-08 (Vol.30 No.4)
  4. 10.11112/jksmi.2026.30.4.221
XML PDF INFO REF

References

1 
Ahmed, G. H. (2023), A review of “3D concrete printing”: Materials and process characterization, economic considerations and environmental sustainability, Journal of Building Engineering, 66, 105863DOI
2 
Carvalho, I. C., Melo, A. R. S., Melo, C. D. R., Brito, M. S., Chaves, A. R., Babadopulos, L. F. A. L., Bastos, J. B. S. (2024), Evaluation of the effect of rubber waste particles on the rheological and mechanical properties of cementitious materials for 3D printing, Construction and Building Materials, 411, 134377DOI
3 
Choi, J. I., Lee, B. Y., Ranade, R., Li, V. C., Lee, Y. (2016), Ultra-high-ductile behavior of a polyethylene fiber-reinforced alkali-activated slag-based composite, Cement and Concrete Composites, 70, 153-158.DOI
4 
Choi, J. I., Park, S. E., Kim, Y. Y., Lee, B. Y. (2022), Highly ductile behavior and sustainability of engineered cementitious composites reinforced by PE based selvage fibers, Cement and Concrete Composites, 134, 104729DOI
5 
Huang, X., Ranade, R., Ni, W., Li, V. C. (2013), On the use of recycled tire rubber to develop low E-modulus ECC for durable concrete repairs, Construction and Building Materials, 46, 134-141.DOI
6 
Hyun, C. J., Kim, H. J., Lee, B. Y., Kim, Y. Y. (2025), Properties of alkali-activated slag-based, 3D-printable SHCC reinforced with selvage fibers, Journal of the Korea Institute for Structural Maintenance and Inspection, 29(6), 172-179. (in Korean)Google Search
7 
Kim, Y. Y., Kong, H. J., Li, V. C. (2003), Design of engineered cementitious composite suitable for wet-mixture shotcreting, ACI Materials Journal, 100(6), 511-518.DOI
8 
Lee, B. Y., Cho, C. G., Lim, H. J., Song, J. K., Yang, K. H., Li, V. C. (2012), Strain hardening fiber reinforced alkali-activated mortar—A feasibility study, Construction and Building Materials, 37, 15-20.DOI
9 
Li, V. C., Leung, C. K. Y. (1992), Steady-state and multiple cracking of short random fiber composites, Journal of Engineering Mechanics, 118(11), 2246-2264.DOI
10 
Li, V. C., Bos, F. P., Yu, K., McGee, W., Ng, T. Y., Figueiredo, S. C., Nefs, K., Mechtcherine, V., Nerella, V. N., Pan, J., van Zijl, G. P. A. G., Kruger, P. J. (2020), On the emergence of 3D printable engineered, strain hardening cementitious composites (ECC/SHCC), Cement and Concrete Research, 132, 106038DOI
11 
Lương, Q. H., Nguyễn, H. H., Choi, J. I., Kim, H. K., Lee, B. Y. (2021), Effects of crumb rubber particles on mechanical properties and sustainability of ultra-high-ductile slag-based composites, Construction and Building Materials, 272, 121959DOI
12 
Lương, Q. H., Nguyễn, H. H., Nguyễn, P. H., Park, S. E., Kim, Y. S., Lee, B. Y. (2025), Achieving ultra-ductility exceeding 13 % and cost efficiency with rubberized alkali-activated slag-based cement-free composites, Developments in the Built Environment, 22, 100677DOI
13 
Ohno, M., Li, V. C. (2018), Micromechanics-based design of strain-hardening geopolymer composites, Cement and Concrete Composites, 89, 121-129.Google Search
14 
Seo, J. S., Kim, H. J., Kim, Y. Y. (2022), Performance evaluation of cement composite using multi-component binder for artificial reef produced by 3D printer, Journal of the Korea Institute for Structural Maintenance and Inspection, 26(6), 139-147. (in Korean)Google Search
15 
Wang, S., Li, V. C. (2004), Tailoring of pre-existing flaws in ECC matrix for saturated strain hardening, Proceedings of FraMCoS-5, 1005-1012., Vail, CO, USAGoogle Search
16 
Yu, K., McGee, W., Ng, T. Y., Zhu, H., Li, V. C. (2021), 3D-printable engineered cementitious composites (3DP-ECC): Fresh and hardened properties, Cement and Concrete Research, 143, 106388DOI
17 
Zhang, Z., Qian, S. (2013), Influence of crumb rubber on the mechanical behavior of engineered cementitious composites, Proceedings of FraMCoS-8, 1-10., Toledo, SpainGoogle Search
18 
Zhang, Z., Qin, F., Ma, H., Xu, L. (2020), Tailoring an impact resistant engineered cementitious composite (ECC) by incorporation of crumb rubber, Construction and Building Materials, 262, 120116DOI
19 
Zhu, B., Pan, J., Nematollahi, B., Zhou, Z., Zhang, Y., Sanjayan, J. (2019), Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction, Materials & Design, 181, 108088DOI