• 대한전기학회
Mobile QR Code QR CODE : The Transactions of the Korean Institute of Electrical Engineers
  • COPE
  • kcse
  • 한국과학기술단체총연합회
  • 한국학술지인용색인
  • Scopus
  • crossref
  • orcid
Title Development of a Broadband Multi-Operation Mode Signal Processing Unit for Small Millimeter Wave Tracking Radar
Authors 이재원(Jae-Won Lee) ; 최진규(Jin-Kyu Choi) ; 안세환(Se-Hwan An) ; 신영철(Young-Cheol Shin) ; 홍순일(Soon-Il Hong) ; 류제덕(Jae-Deok Ryu) ; 이지영(Ji-Young Lee) ; 이재웅(Jae-Woong Yi) ; 주지한(Ji-Han Joo)
DOI https://doi.org/10.5370/KIEE.2026.75.4.885
Page pp.885-890
Keywords Radar; Millimeter Wave; Signal Processing Unit; Broadband; Multi-Operation Mode; ADC; FPGA; DDC
Abstract This paper summarizes the development of a broadband multi-operation mode signal processing unit for small millimeter wave tracking radar. The signal processing unit supports multiple operating modes to accommodate diverse environments and possesses broadband signal processing capabilities. The signal processing unit in this paper consists of three boards: DAQ, OPC, and PWR. A digital receiver is designed for the DAQ to receive and process a 3-channel broadband reception signal with an specific center frequency above 100MHz. The digital receiver utilizes an ADC for high-speed sampling and an FPGA-based DDC(Digital Down Converter). The DDC incorporates various functions, including a DDS (Direct Digital Synthesizer), an FIR (Finite Impulse Response) filter, and decimation. The DDC has two operating modes, A and B, and uses different DDC paths for signal processing depending on the mode. Furthermore, a FFT(Fast Fourier Transform) and data type conversion are applied to reduce the load on the DSP(Digital Signal Processor) in the postprocessing stage. In OPC, multi-core DSP are used for post-processing to detect and track targets in parallel. In addition, external interfaces are used to control the radar system. And PWR is designed to supply the power required for the signal processing unit. Finally, tests were conducted to verify the performance of the signal processing unit. Reception dynamic range and frequency error measurement tests were conducted, and all tests achieved their objectives. This verified the development of a broadband multi-operation mode signal processing unit.