| Title |
Device Development of Mixture Concentration of Ethylene Glycol Antifreeze Coolant for Vehicles |
| Authors |
Dae-Woong Lee ; Eun-Woung Lee |
| DOI |
http://dx.doi.org/10.6110/KJACR.2016.28.8.331 |
| Keywords |
부동액 ; 증류수 ; 에틸렌글리콜 ; 혼합 농도 ; 부피비 Anti-freeze coolant ; Distilled water ; Ethylene glycol ; Mixture concentration ; Volume percentage |
| Abstract |
This study presents a coolant density calculation device and its corresponding method by using a mass flowmeter and the LabVIEW program. The method can be easily measured with a mixture of coolant and by calculating the percentage of ethylene-glycol without additional investment. The cooling water is very important in a vehicle to protect the engine, and the cooling performance is affected by the mixture concentration and coolant density. The coolant density calculation device measures the mixed concentration in the anti-freeze cooling mixture made from distilled water and ethylene-glycol in real time with the mass flowmeter that is commonly attached to the radiator or heater core. The calculation program for the mixture concentration percentage was developed using the LabVIEW software. The correlation between experimental results and the calculation was conducted for a range of temperature from 40 to 90℃ and by varying the mixture ratio of distilled water and ethylene-glycol. As a result, the anti-freeze coolant concentration in the volume percentage is able to monitor the coolant density in a timely basis by implementing a mixture concentration calculation program without the need for additional equipment investment. The results of the calculation for the mixture concentration level show a maximum 2.7% deviation compared to the experimental results. |