Mobile QR Code QR CODE : Korean Journal of Air-Conditioning and Refrigeration Engineering
Korean Journal of Air-Conditioning and Refrigeration Engineering

Korean Journal of Air-Conditioning and Refrigeration Engineering

ISO Journal TitleKorean J. Air-Cond. Refrig. Eng.
  • Open Access, Monthly
Open Access Monthly
  • ISSN : 1229-6422 (Print)
  • ISSN : 2465-7611 (Online)

References

1 
Bouckaert, S., Pales, A. F., McGlade, C., Remme, U., Wanner, B., Varro, L., and Spencer, T., 2021, Net Zero by 2050: A Roadmap for the Global Energy Sector, International Energy Agency (IEA), pp. 131-140.URL
2 
Liu, M., Saman, W., and Bruno, F., 2012, Development of a Novel Refrigeration System for Refrigerated Trucks Incorporating Phase Change Material, Applied Energy, Vol. 92, pp. 336-342.DOI
3 
Gaedtke, M., Wachter, S., Kunkel, S., Sonnick, S., Radle, M., Nirschl, H., and Krause, M. J., 2020, Numerical Study on the Application of Vacuum Insulation Panels and a Latent Heat Storage for Refrigerated Vehicles with a Large Eddy Lattice Boltzmann Method, Heat and Mass Transfer, Vol. 56, pp. 1189-1201.DOI
4 
Choi, Y. S., Kim, D. H., Seo, J. S., and Jo, K. C., 2015, Heat Transfer Characteristics for the Design of Fin and Tube Heat Exchangers in a Refrigeration Truck, SAREK, pp. 896-899.URL
5 
Myung, C. W., Kim, S. H., and Cho, H. H., 2011, Analytical Study of Cooling Performance Comparison in a Refrigerator Truck Using R404A and R744, KSAE, Vol. 19, pp. 119-125.URL
6 
Choi, Y. S., 2019, A Study on Performance Characteristics for Optimizing 10 kW Refrigeration Unit System for Refrigerator Truck (Ph.D. dissertation), Sunmoon University, Asan, Korea.URL
7 
Cavallini, A., Doretti, L., Klammsteiner, N., Longo, G. A., and Rossetto, L., 1995, Condensation of New Refrigerants Inside Smooth and Enhanced Tubes, International Congress of Refrigeration, Vol. 4, pp. 105-114.URL
8 
Wang, C. C., Chiou, C. B., and Lu, D. C., 1996, Single-phase Heat Transfer and Flow Friction Correlations for Microfin Tubes, International Journal Heat and Fluid Flow, Vol. 17, pp. 500-508.DOI
9 
Newell, T. A. and Shah, R. K. 1999, Refrigerant Heat Transfer, Pressure Drop, and Void Fraction Effects in Microfin Tubes, Proc. 2nd Int. Symp. On Two-Phase Flow and Experimentation, Vol. 3, pp. 1623-1639.URL
10 
Fang, X., Xu, Y., and Zhou, Z., 2011, New Correlations of Single-phase Friction Factor for Turbulent Pipe Flow and Evaluation of Existing Single-phase Friction Factor Correlations, Nuclear Engineering and Design, Vol. 241, pp. 897-902.DOI
11 
Wang, C. C., Lee, C. J., Chang, C. T., and Lin, S. P., 1999, Heat Transfer and Friction Correlation for Compact Louvered fin-and-tube Heat Exchangers, International Journal of Heat and Mass Transfer, Vol. 42, pp. 1945-1956.DOI
12 
Gungor, K. E. and Winterton, H. S., 1986, A General Correlation for Flow Boiling in Tubes and Annuli, International Journal of Heat and Mass Transfer, Vol. 29, pp. 351-358.DOI
13 
Wang, C. C. and Chang, Y. J., 1996, Sensible heat and friction characteristics of plate fin-and-tube heat exchangers having plane fins, International Journal of Refrigeration, Vol. 19, pp. 223-230.DOI
14 
Park, C. S., Cho, H. H., Lee, Y. T., and Kim, Y. C., 2007, Mass Flow Characteristics and Empirical Modeling of R22 and R410A Flowing Through Electronic Expansion Valves, International Journal of Refrigeration, Vol. 30, pp. 1401-1407.DOI
15 
Heat exchanger catalog, http://www.atechelthermo.com/bbs/board.php?bo_table=pro_2&wr_id=2, A-TECH EL THERMO co.URL