(2010), The resistance of high alumina cement against corrosion of steel in concrete,
Construction and Building Materials, 24(8), 1502-1510.
(2005), Role of alkalis of aggregate origin in the deterioration of CAC concrete,
Cement and Concrete Research, 35(9), 1698-1704.
(2014), Calcium aluminate cement tapes-Part. I : Structural and microstructural characterizations,
Journal of the European Ceramic Society, 34(4), 1017-1023.
(2012), Mechanical properties and corrosion of CAC mortars with carbon fibers, Construction
and Building Materials, 34, 91-96.
(2009), Influence of the use of rice husk ash on the electrical resistivity of concrete:
A technical and economic feasibility study, Construction and Building Materials, 23(11),
3411-3419.
(1997), Early strength development and hydration of ordinary portland cement / calcium
aluminate cement pastes, Advanced Cement Based Materials, 6(2), 53-58.
(2013), Effect of steel fiber distribution on steel fiber-reinforced concrete on
surface electrical resistivity, Journal of the Korea Institute for Structural Maintenance
and Inspection, 17(1), 106-113.
(2013), Compressive strength development of calcium aluminate cement-GGBFS blends,
Cement and Concrete Composites, 35(1), 163-170.
(2001), Mechanical properties of calcium aluminate cement concretes, Proceedings
of the International Conference on CAC, 199-213.
(2003), Porosity-strength relation in calcium aluminate cement pastes, Cement and
Concrete Research, 33(11), 1801-1806.
(2012), Chemical activation of calcium aluminate cement composites cured at elevated
temperature, Cement and Concrete Composites, 34(10), 1187-1193.
(2000), Special inorganic cements, 123-126.
(2013), Effect of curing regime on concrete resistivity and aging factor over time,
Construction and Building Materials, 48, 874-882.
(2011), Practical evaluation of relationship between concrete resistivity, water
penetration, rapid chloride penetration and compressive
strength, Construction and Building Materials, 25(5), 2472-2479.
(1999), Highperformance concretes from calcium aluminate cements, Cement and Concrete
Research, 29(8), 1215-1223.
(2014), Use of electrical resistivity as an indicator for durability, Construction
and Building Materials, 73, 434-441.
(2009), Effect of embedded steel on electrical resistivity measurements on concrete
structures, ACI Materials Journal, 106(1), 11-18.
(2012), Formation of ettringite in Portland cement/calcium aluminate cement/calcium
sulfate ternary system hydrates at lower temperatures, Construction and Building Materials,
31, 347-352.
(2000), Development of high performance concrete using silica fume at relatively
high water-binder ratios, Cement and Concrete Research, 30(9), 1501-1505.