Mobile QR Code QR CODE

Journal of the Korea Concrete Institute

J Korea Inst. Struct. Maint. Insp.
  • Indexed by
  • Korea Citation Index (KCI)

References

1 
Wang, C., Ikuma, L., Hondzinski, J., and de Queiroz, M. (2017), Application of assistive wearable robotics to alleviate construction workforce shortage: Challenges and opportunities, Journal of Computing in Civil Engineering 2017, ASCE, 358-365.URL
2 
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., and Thorpe, T. (2012(a)), Hardened properties of high- performance printing concrete. Cement and Concrete Research, PERGAMON-ELSEVIER SCIENCE LTD, 42(3), 558-566.DOI
3 
Tay, Y. W. D., Panda, B., Paul, S. C., Noor Mohamed, N. A., Tan, M. J., and Leong, K. F. (2017), 3D printing trends in building and construction industry: a review, Virtual and Physical Prototyping, TAYLOR & FRANCIS LTD, 12(3), 261-276.DOI
4 
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., and Thorpe, T. (2012(b)), Mix design and fresh properties for high-performance printing concrete. Materials and Structures, SPRINGER, 45(8), 1221-1232.DOI
5 
Panda, B., and Tan, M. J. (2018), Experimental Study on Mix Proportion and Fresh Properties of Fly Ash Based Geopolymer for 3D Concrete Printing, Ceramics International, ELSEVIER SCI LTD, 44(9), 10258-10265.DOI
6 
Ma, G., Li, Z., and Wang, L. (2018), Printable properties of cementitious material containing copper tailings for extrusion based 3D printing, Construction and Building Materials, ELSEVIER SCI LTD, 162, 613-627.DOI
7 
Kazemian, A., Yuan, X., Cochran, E., and Khoshnevis, B. (2017), Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture, Construction and Building Materials, ELSEVIER SCI LTD, 145, 639-647.DOI
8 
Rahul, A. V., Santhanam, M., Meena, H., and Ghani, Z. (2019), 3D printable concrete: Mixture design and test methods. Cement and Concrete Composites, ELSEVIER SCI LTD, 97, 13-23.DOI
9 
Shah, H. A., Yuan, Q., and Photwichai, N. (2022), Use of Materials to Lower the Cost of Ultra-High-Performance Concrete – A Review, Construction and Building Materials, ELSEVIER SCI LTD, 327, 127045.DOI
10 
Lee, H., Kim, W. W., Seo, E. A., and Moon, J. H. (2020), Effect of Shrinkage Characteristics of Cement-Based Composites by Extrusion and Lamination Process of Construction 3D Printing, Journal of the Korea Institute for Structural Maintenance and Inspection, 24(6), 113-118 (in Korean).DOI
11 
Seo, E. A., Yang, K. H., and Lee, H. J. (2022), Experimental Study for Evaluating Early Age Shrinkage of Mortar for 3D Printing, Journal of the Korea Institute for Structural Maintenance and Inspection, 26(2), 76-83 (in Korean).DOI
12 
Rahul, A. V., Mohan, M. K., De Schutter, G., and Tittelboom, K. (2022), 3D Printable Concrete with Natural and Recycled Coarse Aggregates: Rheological, Mechanical and Shrinkage Behaviour, Cement and Concrete Composites, ELSEVIER SCI LTD, 125, 104311.DOI
13 
Xiao, J., Ji, G., Zhang, Y., Ma, G., Mechtcherine, V., Pan, J., Wang, L., Ding, T., Duan, Z., and Du, S. (2021), Large-scale 3D printing concrete technology: Current status and future opportunities, Cement and Concrete Composites, ELSEVIER SCI LTD, 122, 104115.DOI
14 
Lee, Y. J., Han, S. J., Jeong, H., Kim, J. H., and Kim, K. S. (2020), Material Characteristics of Rapid Prototyping Concrete and Member Behavior, Journal of the Korea Concrete Institute, KCI, 32(1), 85-93 (in Korean).DOI
15 
Jeong, H., Han, S. J., Choi, S. H., Lee, Y. J., Yi, S. T., and K. S. Kim. (2019), Rheological Property Criteria for Buildable 3D Printing Concrete, Materials, MDPI, 12(4), 657.DOI
16 
Ye, J., Cui, C., Yu, J., Yu, K., and Xiao, J. (2021), Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber, Composites Part B: Engineering, ELSEVIER SCI LTD, 211, 108639.DOI
17 
Chen, Y., Zhang, Y., Pang, B., Liu, Z., and Liu, G. (2021), Extrusion-based 3D printing concrete with coarse aggregate: Printability and direction-dependent mechanical performance., Construction and building materials, ELSEVIER SCI LTD, 296, 123624.DOI
18 
Ji, G., Ding, T., Xiao, J., Du, S., Li, J., and Duan, Z. (2019), A 3D printed ready-mixed concrete power distribution substation: Materials and construction technology. Materials, MDPI, 12(9), 1540.DOI
19 
Ji, G., Xiao, J., Zhi, P., Wu, Y. C., and Han, N. (2022), Effects of extrusion parameters on properties of 3D printing concrete with coarse aggregates, Construction and Building Materials, ELSEVIER SCI LTD, 325, 126740.DOI
20 
Liu, H., Liu, C., Bai, G., Wu, Y., He, C., Zhang, R., and Wang, Y. (2022), Influence of pore defects on the hardened properties of 3D printed concrete with coarse aggregate, Additive Manufacturing, ELSEVIER, 55, 102843.DOI
21 
Mechtcherine, V., Nerella, V. N., Will, F., and Näther, M. (2019), Large-Scale Digital Concrete construction–CONPrint3D Concept for on-Site, Monolithic 3D-Printing, Automation in Construction, ELSEVIER, 107, 102933.DOI
22 
Rahul, A. V., and Santhanam, M. (2020) Evaluating the Printability of Concretes Containing Lightweight Coarse Aggregates, Cement and Concrete Composites, ELSEVIER SCI LTD, 109, 103570.DOI
23 
Vespalec, A., Novák, J., Kohoutková, A., Vosynek, P., Podroužek, J., Škaroupka, D., Zikmund, T., Kaiser, J., and Paloušek, D. (2020), Interface behavior and interface tensile strength of a hardened concrete mixture with a coarse aggregate for additive manufacturing, Materials, MDPI, 13(22), 5147.DOI
24 
Wang, X., Jia, L., Jia, Z., Zhang, C., Chen, Y., Ma, L., Wang, Z., Deng, Z., Banthia, N., and Zhang, Y. (2022), Optimization of 3D printing concrete with coarse aggregate via proper mix design and printing process, Journal of Building Engineering, ELSEVIER, 56, 104745.DOI
25 
Xiao, J., Lv, Z., Duan, Z., and Hou, S. (2022). Study on preparation and mechanical properties of 3D printed concrete with different aggregate combinations, Journal of Building Engineering, ELSEVIER, 51, 104282.DOI
26 
Zhang, C., Jia, Z., Wang, X., Jia, L., Deng, Z., Wang, Z., Zhang, Y. and Mechtcherine, V. (2022), A two-phase design strategy based on the composite of mortar and coarse aggregate for 3D printable concrete with coarse aggregate, Journal of Building Engineering, ELSEVIER, 54, 104672.DOI
27 
A. M. Neville. (1997), Properties of Concrete (4th edition), WILEY, London: Longman, 62-262.URL