Mobile QR Code QR CODE

Journal of the Korea Concrete Institute

J Korea Inst. Struct. Maint. Insp.
  • Indexed by
  • Korea Citation Index (KCI)

References

1 
Valinejadshoubi, M., Bagchi, A., and Moselhi, O. (2016), Structural health monitoring of buildings and infrastructure, Struct. Health Monit, 1, 50371.URL
2 
Sivasuriyan, A., Vijayan, D. S., Górski, W., Wodzyński, Ł., Vaverková, M. D., and Koda, E. (2021), Practical implementation of structural health monitoring in multi-story buildings, Buildings, 11(6), 263.DOI
3 
Farrar, C. R., and Worden, K. (2007), An introduction to structural health monitoring, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 365(1851), 303-315.DOI
4 
Herranen, H., Kuusik, A., Saar, T., Reidla, M., Land, R., Märtens, O., and Majak, J. (2014), Acceleration data acquisition and processing system for structural health monitoring, In 2014 IEEE Metrology for Aerospace (MetroAeroSpace), IEEE. 244-248.DOI
5 
Ramos, L. F., Aguilar, Lourenço, P. B., and Moreira, S. (2013), Dynamic structural health monitoring of Saint Torcato church, Mechanical Systems and Signal Processing, 35(1-2), 1-15.DOI
6 
Ierimonti, L., Venanzi, I., Cavalagli, N., Comodini, F., and Ubertini, F. (2020), An innovative continuous Bayesian model updating method for base-isolated RC buildings using vibration monitoring data, Mechanical Systems and Signal Processing, 139, 106600.DOI
7 
Chang, C. M., Lin, T. K., and Chang, C. W. (2018), Applications of neural network models for structural health monitoring based on derived modal properties, Measurement, 129, 457-470.DOI
8 
Zhou, C., Chase, J. G., Rodgers, G. W., Huang, B., and Xu, C. (2017), Effective stiffness identification for structural health monitoring of reinforced concrete building using hysteresis loop analysis, Procedia Engineering, 199, 1074-1079.DOI
9 
Goyal, D., and Pabla, B. S. (2016), The vibration monitoring methods and signal processing techniques for structural health monitoring: a review, Archives of Computational Methods in Engineering, 23, 585-594.DOI
10 
Por, E., van Kooten, M., and Sarkovic, V. (2019), Nyquist- Shannon sampling theorem, Leiden University, 1(1), 1-2.URL
11 
Lee, S. J., Kim, J. Y., and Choi, K.-K. (2019), Investigation of Dynamic Characteristcs Uninterruptible Power Supply System (UPS) Using Shaking Table Tests, Journal of the Architectural Institute of Korea Structure & Construction, 35(11), 129-136 (in Korean).DOI
12 
Papagiannopoulos, G. A., and Hatzigeorgiou, G. D. (2011), On the use of the half-power bandwidth method to estimate damping in building structures, Soil Dynamics and Earthquake Engineering, 31(7), 1075-1079.DOI
13 
Liu, M., and Gorman, D. G. (1995), Formulation of Rayleigh damping and its extensions, Computers & Structures, 57(2), 277-285.DOI
14 
Pastor, M., Binda, M., and Harčarik, T. (2012), Modal assurance criterion, Procedia Engineering, 48, 543-548.DOI
15 
Sharma, S., Dangi, S. K., Bairwa, S. K., and Sen, S. (2022), Comparative study on sensitivity of acceleration and strain responses for bridge health monitoring, Journal of Structural Integrity and Maintenance, 7(4), 238-251.DOI
16 
McCrum, D. P., Wang, S., and OBrien, E. J. (2023), Monitoring the health of bridges using accelerations from a fleet of vehicles without knowing individual axle weights, Journal of Structural Integrity and Maintenance, 8(4), 249-259.DOI
17 
Chu, S. Y., Kang, C. J., Hu, M. X., and Chang, L. C. (2022), Rapid damage assessment of 1/3 scaled-down two-story reinforced concrete school building models, Journal of Structural Integrity and Maintenance, 7(2), 110-119.DOI
18 
Lee, S. J., Lee, J. E., Dinh, N. H., and Choi, K.-K. (2022), Time history analysis for investigation of dynamic behavioral characteristics of uninterruptible power supply system, Journal of Structural Integrity and Maintenance, 7(2), 91-109.DOI
19 
Kim, S. Y., Kim, M. Y., Lee, S. J., and Choi, K.-K. (2023), Derivation of Dynamic Characteristic Values for Multi-degree- of-freedom Frame Structures based on Frequency Response Function (FRF), Journal of the Korea Institute for Structural Maintenance and Inspection, 27(4), 1-10 (in Korean).DOI