Mobile QR Code QR CODE : The Transactions of the Korean Institute of Electrical Engineers


Ohnishi K., Shibata M., Murakami T., 1996, Motion control for advanced mechatronics, IEEE/ASME Transactions on Mechatronics, Vol. 1, No. 1, pp. 56-67DOI
Yao B., Majed M. A., Tomizuka M., 1997, High- performance robust motion control of machine tools: an adaptive robust control approach and comparative experiments, IEEE/ASME Transactions on Mechatronics, Vol. 2, No. 2, pp. 63-76DOI
Lee J., Chang P. H., Jin M., 2017, Adaptive integral sliding mode control with time-delay estimation for robot manipulators, IEEE Transactions on Industrial Electronics, Vol. 64, No. 8, pp. 6796-6804DOI
Baek J., Cho S., Han S., 2017, Practical time-delay control with adaptive gains for trajectory tracking of robot manipulators, IEEE Transactions on Industrial Electronics, Vol. 65, No. 7, pp. 5682-5692DOI
Bae Y. G., Jung S., 2018, Balancing control of a mobile manipulator with two-wheels by an acceleration-based disturbance observer, International Journal of Humanoid Robotics, Vol. 15, No. 3DOI
Jeong S. H., Jung S., Tomizuka M., 2012, Attitude control of a quad-rotor system using an acceleration-based disturbance observer: An empirical approach, IEEE/ ASME International Conference on Advanced Intelligent Mechatronics, pp. 916-921DOI
Quigley M., Brewer R., Soundararaj S. P., Pradeep V., Le Q., Ng A. Y., 2010, Low-cost accelerometers for robotic manipulator perception, IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 6168-6174DOI
Roan P., Deshpande N., Wang Y., Pitzer B., 2010, Manipulator stae etimation with low cost accelerometers and gyroscopes, IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 4822-4827DOI
Chen W., Tomizuka M., 2014, Direct joint space state estimation in robots with multiple elastic joints, IEEE/ASME Transactions on Mechatronics, Vol. 19, No. 2, pp. 697-706DOI
Cantelli L., Muscato G., Nunnari M., Spina D., 2015, A joint-angle estimation method for industrial manipulators using inertial sensors, IEEE/ASME Transactions on Mechatronics, Vol. 20, No. 5, pp. 2486-2495DOI
Shino M., Nagai M., 2003, Independent wheel torque control of small-scale electric vehicle for handling and stability improvement, JSAE Review, Vol. 24, No. 4, pp. 449-456DOI
Osborn R. P., Shim T., 2006, Independent control of all- wheel-drive torque distribution, International Journal of Vehicle Mechanics and Mobility, Vol. 44, No. 7, pp. 529-546DOI
Park J., Jeong H., Jang In. G., Hwang S. H., 2015, Torque distribution algorithm for an independently driven electric vehicle using a fuzzy control method, Energies, No. 8, pp. 8537-8561DOI
He H., Peng J., Xiong R., Fan H., 2014, An Acceleration slip regulation strategy for four-wheel drive electric vehicles based on sliding mode control, Energies, Vol. 7, No. 8, pp. 3748-3763DOI
Shuai Z., Zhang H., Wang J., Li J., Ouyang M., 2014, Combined AFS and DYC control of four-wheel- independent-drive electric vehicles over CAN network with time-varying delays, IEEE Transactions on Vehicular Technology, Vol. 63, No. 2, pp. 591-602DOI
Tempel P., Herve P. El., Tempier O., Gouttefarde M., Pott A., 2017, Estimating inertial parameters of suspended cable-driven parallel robots-use case on CoGiRo, IEEE International Conference on Robotics and Automation, pp. 6093-6098DOI
Atkeson C. G., An C. H., Hollerbach J. M., 1986, Estimation of inertia parameters of manipulator loads and links, The International Journal of Robotics Research, Vol. 5, No. 3, pp. 101-119DOI
Lee S. D., Jung S., 2016, An experimental study on real time estimation of a nominal model for a disturbance observer: Recursive least square approach, Journal of Institute of Control, Robotics and Systems, Vol. 22, No. 8, pp. 650-655Google Search
Lee S. D., Jung S., September 20-23, 2016, An identification technique for non-minimum phase systems by a recursive least square method, Proceedings of the SICE Annual Conference 2016,Tsukuba, Japan, pp. 624-626Google Search
Lee S. D., Jung S., 2018, A state and disturbance observer design technique with a recursive least squares method: a second-order system for a CMG, Journal of Institute of Control, Robotics and Systems, Vol. 24, No. 5, pp. 438-444Google Search
Janabi-Sharifi F., Hayward V., Chen C. S. J., 2000, Discrete-time adaptive windowing for velocity estimation, IEEE Transactions on Control Systems Technology, Vol. 8, No. 6, pp. 1003-1009DOI