J. F. Gieras, R. J. Wang, and M. J. Kamper, “Axial Flux Permanent Magnet Brushless Machines,” New York, USA : Springer-Verlag, pp. 1~19, 2008.

A. Cavagnino, M. Lazzari, F. Profumo, and A. Tenconi, “A comparison between the axial flux and the radial flux structures for PM synchronous motors,” IEEE Trans. Ind. Appl., vol. 38, no. 6, pp. 1517~1524, 2002. DOI:10.1109/IAS.2001.955750.

K. M. Rahman, N. R. Patel, T. G. Ward, J. M. Nagashima, F. Caricchi, and F. Crescimbini, “Application of direct-drive wheel motor for fuel cell electric and hybrid electric vehicle propulsion system,” IEEE Trans. Ind. Appl., vol. 42, no. 5, pp. 1185~1192, 2006. DOI:10.1109/TIA.2006.880886.

C. Corey, J. H. Kim, and B. Sarlioglu, “2-d modeling and experimental testing of single rotor dual stator axial-flux permanent magnet machines,” in 2019 IEEE Energy Conversion Congress and Exposition (ECCE), pp. 2996~3003, 2019. DOI: 10.1109/ECCE.2019.8912517.

K. H. Shin, H. W. Cho, K. H. Kim, K. Hong, and J. Y. Choi, “Analytical investigation of the on-load electromagnetic performance of magnetic-geared permanent-magnet machines,” IEEE Trans. on Magn., vol. 54, no. 11, pp. 1~5, 2018. DOI:10.1109/TMAG.2018.2842765.

Z. Zhu, L. Wu, and Z. Xia, “An accurate subdomain model for magnetic field computation in slotted surface-mounted permanent-magnet machines,” IEEE Trans. on Magn., vol. 46, no. 4, pp. 1100~1115, 2009. DOI:10.1109/TMAG.2009.2038153

T. Lubin, S. Mezani, and A. Rezzoug, “Analytical computation of the magnetic field distribution in a magnetic gear,” IEEE Trans. on Magn., vol. 46, no. 7, pp. 2611~2621, 2010. DOI:10.1109/TMAG.2010.2044187.

T. Lubin, S. Mezani, and A. Rezzoug, “Exact analytical method for magnetic field computation in the air gap of cylindrical electrical machines considering slotting effects,” IEEE Trans. on Magn., vol. 46, no. 4, pp. 1092~1099, 2009. DOI:10.1109/TMAG.2009.2036257.

Y. Huang, B. Ge, J. Dong, H. Lin, J. Zhu, and Y. Guo, “3-D analytical modeling of no-load magnetic field of ironless axial flux permanent magnet machine,” IEEE Trans. on Magn., vol. 48, no. 11, pp. 2929~2932, 2012. DOI:10.1109/TMAG.2012.2194699.

Y. Xie, Z. Li, and X. Huang, “3-D Analytical Model of Armature Reaction Field Calculation for Ironless Axial Flux Permanent Maanet Motor,” in 2021 24th International Conference on Electrical Machines and Systems (ICEMS), pp. 375~380, 2021. DOI:10.23919/ICEMS52562.2021.9634578.

R. Dorget, T. Lubin, S. Ayat, and J. Lévêque, “3-D Semi-analytical model of a superconducting axial flux modulation machine,” IEEE Trans. on Magn., vol. 57, no. 11, pp. 1~15, 2021. DOI:10.1109/TMAG.2021.3108632.

Z. Liu, and J. Li, “Accurate prediction of magnetic field and magnetic forces in permanent magnet motors using an analytical solution,” IEEE Trans. Energy Convers., vol. 23, no. 3, pp. 717~726, 2008. DOI:10.1109/TEC.2008.926034.

W. Cheng, G. Cao, Z. Deng, L. Xiao, and M. Li, “Torque comparison between slotless and slotted ultra-high-speed AFPM motors using analytical method,” IEEE Trans. on Magn., vol. 58, no. 2, pp. 1~5, 2021. DOI:10.1109/TMAG.2021.3081175

J. Azzouzi, G. Barakat, and B. Dakyo, “Quasi-3-D analytical modeling of the magnetic field of an axial flux permanent-magnet synchronous machine,” IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 746~752, 2005. DOI:10.1109/TEC.2005.845538.

R. Qu, and T. A. Lipo, “Analysis and modeling of air-gap and zigzag leakage fluxes in a surface-mounted permanent-magnet machine,” IEEE Trans. Ind. Appl., vol. 40, no. 1, pp. 121~127, 2004. DOI:10.1109/TIA.2003.821790.

J. Zhao, T. Ma, X. Liu, G. Zhao, and N. Dong, “Performance analysis of a coreless axial-flux PMSM by an improved magnetic equivalent circuit model,” IEEE Trans. Energy Convers., vol. 36, no. 3, pp. 2120~2130, 2020. DOI:10.1109/TEC.2020.3040009