KIEE - The Transactions of the Korean Institute of Electrical Engineers

1

E. Odvarka, A. Mebarki, D. Gerada, N. Brown, and C. Ondrusek, “Electric motor-generator for a hybrid electric vehicle,” Eng. Mech., vol. 16, no. 2, pp. 131–139, 2009.

2

M. J. Melfi, S. Evon, and R. McElveen, “Induction versus permanent magnet motors,” IEEE Ind. Appl. Mag., vol. 15, no. 9, pp. 28–35, 2009.

3

A. J. Grobler, S. R. Holm, and G. van Schoor, “A two-dimensional analytic thermal model for a high-speed PMSM magnet,” IEEE Ind. Electron., vol. 62, no. 11, pp. 6756–6764, 2015.

4

K. T. Kim, K. S. Kim, S. M. Hwang, T. J. Kim, and Y. H. Jung, “Comparison of magnetic forces for IPM and SPM motor with rotor eccentricity,” IEEE Trans. Magn., vol. 37, no. 5, pp. 3448–3451, 2001.

5

J. Hur, and B. W. Kim, “Rotor shape design of an interior PM type BLDC motor for improving mechanical vibration and EMI characteristics,” J. Elect. Eng. Technol., vol. 5, no. 3, pp. 462–467, 2010.

6

M. S. Lim, S. H. Chai, J. S. Yang, and J. P. Hong, “Design and verification of 150-krpm PMSM based on experimental results of prototype,” IEEE Trans. Ind. Electron., vol. 62, no. 12, pp. 7827–7836, 2015.

7

G. Friedrich, “Experimental comparison between Wound Rotor and permanent magnet synchronous machine for Integrated Starter Generator applications,” 2010 IEEE Energy Conversion Congress and Exposition, Atlanta, GA, USA, pp. 1731-1736, 2010.

8

Hong-Jae Jang, Ki-Chan Kim, “Analysis of Design Impact for Improving Harmonic Characteristics of Winding Field Synchronous Motor,” The Transactions of the Korean Institute of Electrical Engineers, vol. 73, no. 12, pp. 2211-2216, 2024.

9

Jin-Hwan Lee, Han-Joon Yoon, Yong-Jae Kim, Sang-Yong Jung, “Analysis of Shaft Voltage Characteristics According to Rotor Overhang of Wound-Field Rotor Synchronous Motor for Electric Vehicle,” The Transactions of the Korean Institute of Electrical Engineers, vol. 73, no. 10, pp. 1648~1653, 2024.

10

Jae-Jun Lee, Ki-Doek Lee, Ik-Sang Jang, Sung-Gu Lee, Woong-Chan Chae, Hyung-Woo Lee, Ju Lee, “Current Control Method of WRSM in High-speed Operation Range,” Journal of Electrical Engineering & Technology, pp. 2052-2056, 2015.

11

Y. Kim, and K. Nam, “Copper-Loss-Minimizing Field Current Control Scheme for Wound Synchronous Machines,” in IEEE Transactions on Power Electronics, vol. 32, no. 2, pp. 1335-1345, 2017.

12

S. -I. Park, and K. -C. Kim, “Torque Ripple Reduction Method With Asymmetric Pole for Wound-Field Synchronous Motor,” in IEEE Transactions on Magnetics, vol. 51, no. 3, pp. 1-4, 2015.

13

M. Bash, and S. Pekarek, “Modeling of salient-pole wound-rotor synchronous machines for population-based design,” 2012 IEEE Power and Energy Society General Meeting, San Diego, CA, USA, pp. 1-1, 2012.

14

H. Liu, L. Xu, M. Shangguan, and W. N. Fu, “Finite element analysis of 1 MW high speed wound-rotor synchronous machine,” IEEE Trans. Magn., vol. 48, no. 11, pp. 4650–4653, 2012.

15

O. Laldin, S. D. Sudhoff, and S. Pekarek, “An analytical design model for wound rotor synchronous machines,” IEEE Trans. Energy Convers., vol. 30, no. 4, pp. 1299–1309, 2015.

16

W. Chai, W. Zhao, and B. I. Kwon, “Optimal design of wound field synchronous reluctance machines to improve torque by increasing the saliency ratio,” IEEE Trans. Magn., vol. 53, no. 11, 2017.

17

N. Janiaud, and F.-X. Vallet, “Electric Vehicle Powertrain Architecture and Control,” Electric Vehicles Symposium 24, pp. 685–686, 2009.

18

W. Yin, G. Li, Z. Qian, and L. Chu, “Flux-weakening control research of IPMSM considering magnetic saturation,” 2015 IEEE 10th Conference on Industrial Electronics and Applications (ICIEA), Auckland, New Zealand, pp. 1242-1245, 2015.

19

Lee EunWoo, Choi DongHo, Lee Chang-Hee, and Lee June-Seok, “Field-Weakening Control Method on Induction Motor of Low-Speed Vehicle Using Look-Up Tables,” Journal of Electrical Engineering & Technology, vol. 19, no. 8, pp. 4903-4913, 2024.

20

N. Pothi, Z. Q. Zhu, and Y. Ren, “Comparison of Flux-Weakening Control Strategies of Novel Hybrid-Excited Doubly Salient Synchronous Machines,” in IEEE Transactions on Industry Applications, vol. 55, no. 4, pp. 3589-3597, 2019.

21

R. Breda, G. Andrioli, S. Calligaro, and R. Petrella, “Extended MTPA and Flux-Weakening Control with Total Copper Loss Minimisation and Transient Torque Compensation for Wound-Rotor Synchronous Machines,” 2023 IEEE Energy Conversion Congress and Exposition (ECCE), Nashville, TN, USA, pp. 4829-4836, 2023.

22

H. -V. Kim, D. -H. Kim, and J. -S. Lee, “Comparison of Flux-Weakening Control Methods for Wound Field Synchronous Motor,” 2024 IEEE Applied Power Electronics Conference and Exposition (APEC), Long Beach, CA, USA, pp. 2403-2408, 2024.

23

Hyun-Jae Lee, Jong-Chan Lee, Gun-Bok Lee, Gil-Dong Kim, Jin-Geun Shon, “Analysis of Voltage Feedback Flux-weakening Control Algorithm for High-Speed Operation of Electric Railways and Electric Vehicles,” The Conference of the Korean Institute of Electrical Engineers, pp. 165-166, 2021.

24

Han-Vit Kim, Do-Hyeon Kim, June-Seok Lee, “Feedforward Compensation Control for High-Speed Operation of a Wound Field Synchronous Motor,” Power Electronics Conference, pp. 262-264, 2024.

25

D. Hwang, and B. -G. Gu, “Field Current Control Strategy for Wound-Rotor Synchronous Motors Considering Coupled Stator Flux Linkage,” in IEEE Access, vol. 8, pp. 111811-111821, 2020.

26

Z. Zhang, X. Zhang, R. Ma, P. Chen, and W. Yang, “Unknown Disturbance Compensation Control of PMSM based on Extended State Observer,” IECON 47th Annual Conference of the IEEE Industrial Electronics Society, Toronto, ON, Canada, pp. 1-6, 2021.

27

Do-Young Gil, Se-Woon Hwang, Joon-Seok Kim, Chang-Hee Lee, and June-Seok Lee, “PLL method with speed feedforward compensation for extended EMF‑based IPMSM sensorless control,” Journal of Power Electronics, vol. 23, no. 11, pp. 1724-1732, 2023.

KIEEThe Transactions of
the Korean Institute of Electrical Engineers

The Transactions of the Korean Institute of Electrical Engineers

ISO Journal TitleTrans. Korean. Inst. Elect. Eng.

Journal Search

Journal XML

References

KIEEThe Transactions ofthe Korean Institute of Electrical Engineers