N. Fujishima, “Technical Trends of SiC Power Semiconductor Devices and Their Applications in Power Electronics,” IEEJ Journal of Industry Applications, vol. 13, no. 4, pp. 372~378, 2024. DOI:10.1541/ieejjia.23005497

I. Khan, A. Zakari, M. Ahmad, M. Irfan, and F. Hou, “Linking energy transitions, energy consumption, and environmental sustainability in OECD countries,” Gondwana Research, vol. 103, pp. 445~457, 2022. DOI:10.1016/j.gr.2021.10.026

T. Van Do, J. P. F. Trovão, K. Li, and L. Boulon, “Wide-Bandgap Power Semiconductors for Electric Vehicle Systems: Challenges and Trends,” IEEE Vehicular Technology Magazine, vol. 16, no. 4, pp. 89~98, 2021. DOI:10.1109/MVT.2021.3112943

E. O. Prado, P. C. Bolsi, H. C. Sartori, and J. R. Pinheiro, “An Overview about Si, Superjunction, SiC and GaN Power MOSFET Technologies in Power Electronics Applications,” Energies, vol. 15, no. 14, pp. –, 2022. DOI:10.3390/en15145244

L. Wang, W. Wang, R. J. E. Hueting, G. Rietveld, and J. A. Ferreira, “Review of Topside Interconnections for Wide Bandgap Power Semiconductor Packaging,” IEEE Transactions on Power Electronics, vol. 38, no. 1, pp. 472~490, 2023. DOI:10.1109/TPEL.2022.3200469

M. Liu, A. Coppola, M. Alvi, and M. Anwar, “Comprehensive Review and State of Development of Double-Sided Cooled Package Technology for Automotive Power Modules,” IEEE Open Journal of Power Electronics, vol. 3, pp. 271~289, 2022. DOI:10.1109/OJPEL.2022.3166684

M. Wang, P. Gao, F. Shi, W. Hu, X. Wang, H. Yan, and Y. Mei, “Advanced Packaging Technology of GaN HEMT Module for High-Power and High-Frequency Applications: A Review,” IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 14, no. 9, pp. 1537~1550, 2024. DOI:10.1109/TCPMT.2024.3447079

L. Xie, E. Deng, S. Yang, Y. Zhang, Y. Zhong, Y. Wang, and Y. Huang, “State-of-the-art of the bond wire failure mechanism and power cycling lifetime in power electronics,” Microelectronics Reliability, vol. 147, pp. 115060, 2023. DOI:10.1016/j.microrel.2023.115060

Y. Yamada, Y. Takaku, Y. Yagi, I. Nakagawa, T. Atsumi, M. Shirai, I. Ohnuma, and K. Ishida, “Reliability of wire-bonding and solder joint for high temperature operation of power semiconductor device,” Microelectronics Reliability, vol. 47, no. 12, pp. 2147~2151, 2007. DOI:10.1016/j.microrel.2007.07.102

A. Waseem, M. S. Ibrahim, C. Lu, M. Waseem, H. H. Lee, and K. H. Loo, “The effect of pre-existing voids on solder reliability at different thermomechanical stress levels: Experimental assessment,” Materials & Design, vol. 233, pp. 112275, 2023. DOI:10.1016/j.matdes.2023.112275

H. Hao, C. Wu, and Y. Zhou, “Numerical Analysis of Blast-Induced Stress Waves in a Rock Mass with Anisotropic Continuum Damage Models Part 1: Equivalent Material Property Approach,” Rock Mechanics and Rock Engineering, vol. 35, no. 2, pp. 79~94, 2002. DOI:10.1007/s006030200012

C.-C. Lee, T.-L. Tzeng, and P.-C. Huang, “Development of Equivalent Material Properties of Microbump for Simulating Chip Stacking Packaging,” Materials, vol. 8, no. 8, pp. 5121~5137, 2015. DOI:10.3390/ma8085121

S. Park, J. Ha, J. An, H. Yoon, and O. Seok, “Design of edge termination for 3.3kV SiC PiN diode using ion implantation,” The Transactions of the Korean Institute of Electrical Engineers Conference, pp. 119~120, 2024. Available: http://www.dbpia.co.kr/ journal/articleDetail?nodeId=NODE11916402

B. Czerny, I. Paul, G. Khatibi, and M. Thoben, “Influence of wirebond shape on its lifetime with application to frame connections,” Proceedings of the 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), pp. 1~5, Apr. 2013. DOI:10.1109/EuroSimE.2013.6529909

Q. Li, Y.-B. Li, H.-D. Fu, C.-M. Tu, B. Xiao, F. Xiao, D.-Y. Zhai, and J.-W. Lu, “Review of the Failure Mechanism and Methodologies of IGBT Bonding Wire,” IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 13, no. 7, pp. 1045~1057, 2023. DOI:10.1109/TCPMT.2023.3297224

M. Kozak, P. Vesely, and K. Dusek, “Analysis of solder mask roughness and stencil shape influence on void formation in solder joints,” Welding in the World, vol. 67, no. 5, pp. 1347~1355, 2023. DOI:10.1007/s40194-023-01505-7

W. Zhao, X. Song, W. Chen, W. Zhang, and G.-A. Xiong, “Influence of Sintering Voids on Thermal Resistance of MOSFETs,” Proceedings of the 2024 25th International Conference on Electronic Packaging Technology (ICEPT), pp. 1~4, Aug. 2024. DOI:10.1109/ICEPT63120.2024.10668797