J. H. Oh, "A Study on Design and Performance Analysis of a Prototype Permanent Magnet Synchronous Generator," Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, vol. 28, no. 7, pp. 75-80, 2014.

K. P. Hong, G. H. Kang, S. K. Lee, "Design of a 6kW Permanent Magnet Synchronous Generator with Low Speed and High Torque for Gyro Wave Power Generation," Journal of Advanced Marine Engineering and Technology, vol. 41, no. 9, pp. 878-883, 2017.

I. S. Jeong, H. J. Choi, J. H. Park, H. W. Choi, M. Choi, J. Y. Choi, J. H. Woo, "Analysis of Finite Element According to the Change in the Axial Length for 60kW Class Permanent Magnet Small Wind Turbine," The Transactions of the Korean Institute of Electrical Engineers, vol. 70, no. 3, pp. 542-547, 2021.

K. H. Kang, S. J. Yu, "Selection of Rotor Structure for PM Generator in the Military Vehicle Applications," pp. 1821-1822, Proceedings of the KIMST Annual Conference, 2018.

J. H. Lee, S. H. Lee, S. K. Sul, "Variable-Speed Engine Generator With Supercapacitor: Isolated Power Generation System and Fuel Efficiency," IEEE Transactions on Industry Applications, vol. 45, no. 6, pp. 2130-2135, 2009.

K. H. Kang, "Study on the Compensation Methods of Initial Rotor Position of Permanent Magnet Type Generator System for a Special-Purposed Vehicle," Ph.D. dissertation, Kookmin University, 2017.

M. Mobarra, M. Rezkallah, A. Ilinca, "Variable Speed Diesel Generators: Performance and Characteristic Comparison," Energies, vol. 15, no. 2, 2022.

A. Rolan, A. Luna, G. Vazquez, D. Aguilar, G. Azevedo, "Modeling of a Variable Speed Wind Turbine with a Permanent Magnet Synchronous Generator," pp. 734-739, Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE), 2009.

S. Paul, J. Chang, "Model-based design of variable speed non-salient pole permanent magnet synchronous generator for urban water pipeline energy harvester," International Journal of Electrical Power & Energy Systems, vol. 125, 2021.

T. H. Kim, "Design of 3MW Class Outer Rotor Type PMSG for Wind Turbine," New & Renewable Energy, vol. 6, no. 4, pp. 41-49, 2010.

S. Huang, X. Long, L. Cai, K. Huang, J. Gao, "An Engineering Design of a 2MW Direct-Drive Permanent-Magnet Wind-Power Generation System," pp. 2337-2342, Proceedings of the 2008 International Conference on Electrical Machines and Systems (ICEMS), 2008.

N. Madani, A. Cosic, C. Sadarangani, "A Permanent Magnet Synchronous Generator for a Small Scale Vertical Axis Wind Turbine," pp. 48-52, Proceedings of the IEEE International Electric Machines & Drives Conference (IEMDC), 2015.

Y. H. Jeong, "The Design and Characteristics Analysis of the 65kW High-Speed Permanent Magnet Synchronous Generator," Master’s thesis, pp. 128-130, 2007.

H. G. Jeong, J. Y. So, D. H. Chung, K. S. Ahn, C. H. Cho, D. K. Kim, "Development of 10kW Permanent Magnet Synchronous Generator for Small Hydropower Generation," Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, vol. 27, no. 9, pp. 44-52, 2013.

Y. Y. Choi, K. Y. Sung, S. J. Hwang, S. H. Kwon, K. C. Lee, M. K. Kim, J. J. Park, J. M. Lee, C. H. Ahn, J. H. Lee, "Design of Synchronous Generator Using Loading Distribution Method," pp. 2239-2241, Proceedings of the KIEE Conference, 2009.

K. T. Kim, G. H. Kang, T. H. Choi, "Optimal Design of Industrial Linear Induction Motor by Loading Distribution and SUMT Method," The Transactions of the Korean Institute of Electrical Engineers, vol. 42, no. 11, pp. 1-11, 1993.