Mobile QR Code QR CODE : Korean Journal of Air-Conditioning and Refrigeration Engineering
Korean Journal of Air-Conditioning and Refrigeration Engineering

Korean Journal of Air-Conditioning and Refrigeration Engineering

ISO Journal TitleKorean J. Air-Cond. Refrig. Eng.
  • Open Access, Monthly
Open Access Monthly
  • ISSN : 1229-6422 (Print)
  • ISSN : 2465-7611 (Online)
Online Submission

Journal Search

  1. Home
  2. Archive
  3. 2021-02 (Vol.33 No.2)
  4. 10.6110/KJACR.2021.33.2.080
XML PDF INFO REF

References

1 
Oh J. T., Choi K. I., Aoyama Y., Saito S., Hihara E., 1999, Effect of Tube Diameter on Boiling Heat Transfer for R-407C Inside a Horizontal Tube, Proceeding of ’99 SAREK, Vol. 99-s-003, pp. 14-18Google Search
2 
Oh H. K., Hong J. W., 1999, Condensing Heat Transfer Characteristics of Alternative Refrigerations in Small Diameter Tube, J. SAREK, Vol. 28, No. 5, pp. 396-402Google Search
3 
Yang C. Y., Webb R. L., 1997, A Predictive Model for Condensation in Small Hydraulic Diameter Tubes Having Axial Micro-Fins, ASME Journal of Heat Transfer, Vol. 119, No. , pp. 776-782DOI
4 
Park C. Y., 2015, General Issues and Correlation for Predicting Flow Boiling Heat Transfer Coefficients in Micro-Scale, Int. J. Air-Cond. Ref., Vol. 23, No. 1530003DOI
5 
Kim N. H., , Condensation of R-134a on Horizontal Enhanced Tubes Having Three-Dimensional Roughness, Int. J. Air-Cond. Ref., Vol. 24, No. 1650013DOI
6 
Choi K. I., Pham Q. V., Oh J. T., Cho H. G., Kim T. H., 2013, Characteristic of Condensation Heat Transfer for R-410A Inside Horizontal Micro-Fin Tubes, Proceeding of 2013 SAREK, Vol. 13-w-008, pp. 29-32Google Search
7 
Cavallini A., Zecchin R., 1974, A Dimensionless Correlation for Heat Transfer in Forced Convection Condensation, Proc. Fifth International Heat Transfer Conference, pp. 309-313Google Search
8 
Traviss D. P., Rohsenow W. M., Baron A. B., 1973, Forced Convection Condensation Inside Tubes : A Heat Transfer Equation for Condenser Design, ASHRAE Trans., Vol. 79, No. Part 1, pp. 157-165Google Search
9 
Shah M. M., 1979, A General Correlation for Heat Transfer During Film Condensation Inside Pipes, International Journal of Heat and Mass Transfer, Vol. 22, pp. 547-556DOI
10 
Lee H.-S., Kim J.-D., Yoon J.-I., 2004, Condensing Heat Transfer Characteristics of Propylene Refrigerant, J. SAREK, Vol. 16, No. 7, pp. 639-644Google Search
11 
Chamra L. M., Webb R. L., Randlett M. R., 1996, Advanced Micro-Fin Tubes for Condensation, International Journal of Heat and Mass Transfer, Vol. 39, No. 9, pp. 1839-1846DOI
12 
Kim M. H., Shin J. S., 2005, Condensation Heat Transfer of R22 and R410A in Horizontal Smooth and Microfin Tubes, International Journal of Refrigeration, Vol. 28, No. 6, pp. 949-957DOI
13 
Sapali S. N., Patil P. A., 2010, Heat Transfer During Condensation of HFC-134a and R-404A Inside of a Horizontal Smooth and Micro-Fin Tube, Experimental Thermal and Fluid Science, Vol. 34, No. 8, pp. 1133-1141DOI
14 
Zhang, 2018, An Experimental Study of R410A Condensation Heat Transfer and Pressure Drops Characteristics in Microfin and Smooth Tubes with 5 Mm OD, International Journal of Heat and Mass Transfer, Vol. 125, pp. 1284-1295DOI
15 
Wilson E. E., 1915, A Basis for Rational Design of Heat Transfer Apparatus, Trans. Am. Soc. Mech. Engrs., Vol. 37, pp. 47-70Google Search
16 
Khartabil H. F., Christensen R. N., Richards D. E., 1988, A Modified Wilson Plot Technique for Determining Heat Transfer Correlations, 2nd U.K. National conference on Heat TransferGoogle Search
17 
Kumar R., Varma H. K., Agrawal K. N., Mohanty B., 2001, A Comprehensive Study of Modified Wilson Plot Technique to Determine the Heat Transfer Coefficient During Condensation of Steam and R-134a over Single Horizontal Plain and Finned Tubes, Heat Transfer Engineering, Vol. 22, No. 2, pp. 3-12DOI
18 
Akers W. W., Deans H. A., Crosser O. K., 1959, Condensation Heat Transfer Within Horizontal Tube, Chemical Engineering, Prog. Symp. Ser., Vol. 55, No. 29, pp. 171-176Google Search
19 
Dobson M. K., Chato J. C., 1998, Condensation in Smooth Horizontal Tubes, Journal of Heat Transfer, transactions of asme, Vol. 120, pp. 193-213DOI