KJACR
Korean Journal of
Air-Conditioning and Refrigeration Engineering
SAREK
Contact
ISSN : 1229-6422 (Print)
ISSN : 2465-7611 (Online)
http://journal.auric.kr/kjacr
Mobile QR Code
Korean Journal of Air-Conditioning and Refrigeration Engineering
ISO Journal Title
Korean J. Air-Cond. Refrig. Eng.
Open Access, Monthly
Open Access
Monthly
ISSN : 1229-6422 (Print)
ISSN : 2465-7611 (Online)
Online Submission
Main Menu
Main Menu
최근호
Current Issue
저널소개
About Journal
논문집
Journal Archive
목적 및 범위
Aims and Scope
편집위원회
Editorial Board
윤리규정
Research &
Publication Ethics
논문투고안내
Instructions to Authors
BM
(Business Model)
연락처
Contact Info
논문투고
Online-Submission
Journal Search
Home
Archive
2022-07
(Vol.34 No.07)
10.6110/KJACR.2022.34.7.307
Journal XML
XML
PDF
INFO
REF
References
1
Sethi A., Becerra E. V., Motta S. F. Y., Spatz M. W., 2015, Low GWP R22 replacement for air conditioning in high ambient conditions, International Journal of Refrigeration, Vol. 57, pp. 26-34
2
Pham H. M., Rajendran R., 2012, R32 and HFOs as low-GWP refrigerants for air conditioning, Proceedings of 14th International Refrigeration and Air Conditioning Conference at Purdue University
3
Xu X., Hwang Y., Radermacher R., 2013, Performance comparison of R410A and R32 in vapor injection cycles, International Journal of Refrigeration, Vol. 36, pp. 892-903
4
Shuxue X., Guoyuan M., Qi L., Zhongliang L., 2013, Experiment study of an enhanced vapor injection refrigeration/heat pump system using R32, International Journal of Thermal Sciences, Vol. 68, pp. 103-109
5
Ko Y., Park S., Jin S., Kim B., Jeong J. H., 2013, The selection of volume ratio of two-stage rotary compressor and its effects on air-to-water heat pump with flash tank cycle, Applied Energy, Vol. 104, pp. 187-196
6
Zhang C., Ma S., Chen J., Chen Z., 2006, Experimental analysis of R22 and R407c flow through electronic expansion valve, Energy Conversion and Management, Vol. 47, pp. 529-544
7
Rasti M., Jeong J. H., 2018, A generalized continuous empirical correlation for predicting refrigerant mass flow rates through adiabatic capillary tubes, Applied Thermal Engineering, Vol. 139, pp. 47-60
8
Rasti M., Jeong J. H., 2021, Mass flow rate of non-equilibrium subcooled two-phase flow of R600a in a household refrigerator-freezer, International Journal of Refrigeration, Vol. 131, pp. 689-705
9
Shanwei M., Chuan Z., Jiangping C., Zhiujiu C., 2005, Experimental research on refrigerant mass flow coefficient of electronic expansion valve, Applied Thermal Engineering, Vol. 25, pp. 2351-2366
10
Park C., Cho H., Lee Y., Kim Y., 2007, Mass flow characteristics and empirical modeling of R22 and R410A flowing through electronic expansion valves, International Journal of Refrigeration, Vol. 30, pp. 1401-1407
11
Zhifang X., Lin S., Hongfei O., 2008, Refrigerant flow characteristics of electronic expansion valve based on thermodynamic analysis and experiment, Applied Thermal Engineering, Vol. 28, pp. 238-243
12
Liang C., Jiangping C., Jinghui L., Zhijiu C., 2009, Experimental investigation on mass flow characteristics of electronic expansion valves with R22, R410A and R407C, Energy Conversion and Management, Vol. 50, pp. 1033-1039
13
Tian Z., Gu B., Qian C., Yang L., Liu F., 2015, Electronic expansion valve mass flow rate prediction based on dimensionless correlation and ANN model, International Journal of Refrigeration, Vol. vol 57, pp. 1-10
14
Chen T., Cha D. A., Kwon O. K., 2017, Experimental investigation on mass flow characteristics of R245fa through electronic expansion valve, Applied Thermal Engineering, Vol. 125, pp. 111-117
15
Chen T., Bae K. J., Kwon O. K., 2019, Mass flow rate prediction of R1233zd through electronic expansion valves based on ANN and power-law correlation models, Applied Thermal Engineering, Vol. 158, pp. 113826
16
Yang Y., Wu J., Feng F., Zhu Y., 2011, Flow characteristics of throttle valve with sharp-edged seat, Proceedings of 2011 International Conference on Fluid Power and Mechatronics, pp. 444-449