| Title |
Development of Technology for Setting Rolling Speed of Finishing Rolling Process in Hot Strip Mill |
| Authors |
Seong-Cheol Hong ; Hai-young Lee |
| DOI |
http://dx.doi.org/10.5207/JIEIE.2013.27.11.047 |
| Keywords |
Finishing Rolling Mill ; Rolling Speed ; Forward Slip ; Looper |
| Abstract |
Rolling speed, roll gap, and cooling pattern in hot strip finishing mill process should be determined before inserting strip into roll. Such parameters are initially calculated by a mathematical set-up model. The technique to find adequate roll speed via a mathematical model has inherently limit because required working conditions are various and rolling process is nonlinear. To improve the accuracy of initial rolling speed for a finishing mill, this paper suggests a correction technology for initial rolling speed. The proposed method was implemented in hot strip mill process. As the results, the magnitude of width error in strip head-end part caused by excessive strip tension was decreased remarkably. |