Mobile QR Code QR CODE

Journal of the Korea Concrete Institute

J Korea Inst. Struct. Maint. Insp.
  • Indexed by
  • Korea Citation Index (KCI)

References

1 
Chen, M., Li, L., Zheng, Y., Zhao, P., Lu, L., Cheng, X. (2018), Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials, The Journal of Construction and Building materials, 189, 601-611.DOI
2 
Seo, J. S., Lee, B. C., Kim, Y. Y. (2019), The Effects of Void Ratio on Extrudability and Buildability of Cement-based Composites Produced by 3D Printers, Journal of the Korea Institute for Structural Maintenance and Inspection, 23(7), 104-112.DOI
3 
Kruger, J., du Plessis, A., van Zijl, G. (2021), An investigation into the porosity of extrusion-based 3D printed concrete, Additive Manufacturing, 37, 101740DOI
4 
Seo, E. A., Lee, H. J., Yang, K. H. (2021), Strength Characteristics of 3D Printed Composite Materials According to Lamination Patterns, Journal of the Korea Institute for Structural Maintenance and Inspection, 25(6), 193-198.DOI
5 
Liu, C., Zhang, R., Liu, H., He, C., Wang, Y., Wu, Y., Zuo, F. (2022), Analysis of the mechanical performance and damage mechanism for 3D printed concrete based on pore structureDOI
6 
Park, K. M., Park, S. H., Lee, B. C., Roh, Y. S. (2020), Evaluation of Binder Jetting 3D Printed Specimens Using Vacuum Impregnation, Journal of the Korea Institute for Structural Maintenance and Inspection, 24(2), 103-110.DOI
7 
Rehman, A. U., Kim, J. H. (2021), 3D concrete printing: A systematic review of rheology, mix designs, mechanical, microstructural, and durability characteristics, Materials, 14(14), 3800DOI
8 
Wang, K., Wi, K., Laflamme, S., Sritharan, S., Taylor, P., Qin, H. (2020), Feasibility Study of 3D Printing of Concrete for Transportation Infrastructure, Final Report, Institute for Transportation, Iowa State University, Ames, IA.Google Search
9 
Ishida, T., Maekawa, K., Kishi, T. (2007), Enhanced modeling of moisture equilibrium and transport in cementitious materials under arbitrary temperature and relative humidity history, Cement and Concrete Research, 37(4), 565-578.DOI
10 
Mabrouk, R., Ishida, T., Maekawa, K. (2004), A unified solidification model of hardening concrete composite for predicting the young age behavior of concrete, Cement and Concrete Composites, 26(5), 453-461.DOI
11 
Al-Zahrani, M. M., Al-Dulaijan, S. U., Ibrahim, M., Saricimen, H., Sharif, F. M. (2002), Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete, Cement and Concrete Composites, 24(1), 127-137.DOI
12 
Park, M. J., Lee, B. J., Kim, J. S., Kim, Y. Y. (2018), Effect of Concrete Strength on Chlordie Ion Penetration Resistance and Chemical Resistance of Concrete Coated by Silopxane-based Water Repellent, Journal of the Korea Concrete Institute, 30(6), 533-590.Google Search
13 
Lee, J., Lee, B. C., Cho, Y. G., Jung, S. H. (2016), Chloride Diffusivity of Concrete using Recycled Aggregate by Strength Levels, Journal of the Korea Institute for Structural Maintenance and Inspection, 20(2), 102-109.DOI
14 
Asami, K., Kikuchi, M. (2003), In-depth distribution of rusts on a plain carbon steel and weathering steels exposed to coastal–industrial atmosphere for 17 years, Corrosion Science, 45(11), 2671-2688.DOI
15 
Ohtsu, M., Yosimura, S. (1997), Analysis of crack propagation and crackinitiation due to corrosion of reinforcement, Construction and Building Materials, 11(7-8), 437-442.DOI
16 
Lee, B. J., Lee, J., Kim, Y. Y. (2017), Durability Performance of Concrete Penetrated and Coated by Polydimethylsiloxane for Penetrating Water Repellency, Journal of the Korea Concrete Institute, 29(6), 607-613.Google Search
17 
Cui, H., Tang, W., Liu, W., Dong, Z., Xing, F. (2015), Experimental study on effects of CO2 concentrations on concrete carbonation and diffusion mechanisms, Construction and Building Materials, 93, 522-527.DOI
18 
Park, K. M., Min, K. S., Lee, B. C., Roh, Y. S. (2021), Proposal for enhancing the compressive strength of alkali-activated materials-based binder jetting 3D printed outputs, Construction and Building Materials, 303, 124377DOI
19 
Lee, J. H., Hyun, J. H., Park, S. H., Kim, Y. Y.. (2018), Compressive Strength and Chloride Ion Penetration Resistance of SHCC Coated by PDMS-based Penetrating Water Repellency, Journal of the Korea Institute for Structural Maintenance and Inspection, 22(6), 16-23.DOI
20 
Wang, F., Lei, S., Ou, J., Li, W. (2020), Effect of PDMS on the waterproofing performance and corrosion resistance of cement mortar, Applied Surface Science, 507, 145016DOI
21 
Khunthongkeaw, J., Tangtermsirikul, S. (2005), Model for simulating carbonation of fly ash concrete, Journal of Materials in Civil Engineering, 17(5), 570-578.DOI