Mobile QR Code QR CODE

Journal of the Korea Concrete Institute

J Korea Inst. Struct. Maint. Insp.
  • Indexed by
  • Korea Citation Index (KCI)

References

1 
Seo, J. S., Kim, H. J., and Kim, Y. Y. (2022), Performance Evaluation of Cement Composite Using Multi-Component Binder for Artificial Reef Produced by 3D Printer, Journal of the Korea Institute for Structural Maintenance and Inspection, 26(6), 139-147 (in Korean).DOI
2 
Zhao, H., Ma, Y., Zhang, J., Hu, Z., Li, H., Wang, Y., and Li, Z. (2022), Effect of clay content on plastic shrinkage cracking of cementitious materials, Construction and Building Materials, 342, 127989.DOI
3 
Won, J. P., Hwang, K. S., and Park, C. G. (2005), Mechanical and Early Shrinkage Crack of Hydrophilic PVA Fiber Reinforced Concrete with Fiber Volume Fraction and Fiber Length, Journal of Civil and Environmental Engineering Research, 25(1A), 133-142.URL
4 
Moelich, G. M., Kruger, P. J., and Combrinck, R. (2022), Mitigating early age cracking in 3D printed concrete using fibres, superabsorbent polymers, shrinkage reducing admixtures, B-CSA cement and curing measures, Cement and Concrete Research, 159, 106862.DOI
5 
Yang, J., Wang, R., and Zhang, Y. (2020), Influence of dually mixing with latex powder and polypropylene fiber on toughness and shrinkage performance of overlay repair mortar, Construction and Building Materials, 261, 120521.DOI
6 
Akindahunsi, A. A., and Uzoegbo, H. C. (2015), Strength and durability properties of concrete with starch admixture, International Journal of Concrete Structures and Materials, 9(3), 323-335.DOI
7 
Hyun, C. J., Kwon, K. S., Seo, J. S., and Kim, Y. Y. (2024), Flexural Behavior of Layered RC Slabs, which Bio-Mimics the Interface of Shell Layers, Produced by Using 3D Printable Highly Ductile Cement Composite, Journal of The Korea Institute for Structural Maintenance and Inspection, 28(1), 90-97 (in Korean).DOI
8 
Li, V. C., Bos, F. P., Yu, K., McGee, W., Ng, T. Y., Figueiredo, S. C., Nefs, K., Mechtcherine, V., Nerella, V. N., Pan, J., Zijl, G. P.A.G. V., and Kruger, P. J. (2020). On the emergence of 3D printable engineered, strain hardening cementitious composites (ECC/SHCC). Cement and Concrete Research, 132, 106038.DOI
9 
Yu, K., McGee, W., Ng, T. Y., Zhu, H., and Li, V. C. (2021), 3D-printable engineered cementitious composites (3DP-ECC): Fresh and hardened properties, Cement and Concrete Research, 143, 106388.DOI
10 
Choi, J. I., Park, S. E., Kim, Y., Yang, K., Kim, Y. Y., and Lee, B. Y. (2022), Highly ductile behavior and sustainability of engineered cementitious composites reinforced by PE based selvage fibers, Cement and Concrete Composites, 134, 104729.DOI
11 
Kim, J. S., Kim, Y. Y., and Kim, J. K. (2007), Diverse application of ECC designed with ground granulated blast furnace slag, International Journal of Concrete Structures and Materials, 1(1), 11-18.10.DOI
12 
Cho, C. G., Lee, B. Y., Kim, Y. Y., Han, B. C., and Lee, S. J. (2012), Flexural behavior of extruded DFRCC panel and reinforced concrete composite slab, Advances in Materials Science and Engineering, 2012.DOI
13 
Lee, B. H., Kim, B. K., and Kim, Y. Y. (2022), Strngth and Durability Characteristics of Low-alkali Mortar for Artificial Reefs Produced by 3D Printers, Journal of the Korea Institute for Structural Maintenance and Inspection, 26(1), 67-72.DOI
14 
Seo, J. S., and Kim, Y. Y. (2022), Experimental Evaluation of the Effect of the Mixing Design Factors of the Cementitious Composite for 3D Printer on the Printing Quality, Journal of the Korea Institute for Structural Maintenance and Inspection, 26(1), 89-96.DOI
15 
Kim, Y. Y., Kong, H. J., and Li, V. C. (2003), Design of engineered cementitious composite suitable for wet-mixture shotcretingm Materials Journal, 100(6), 511-518.URL
16 
Kim, J. S., Kim, J. K., Ha, G. J., and Kim, Y. Y. (2010), Rheological control of cement paste for applying prepackaged ECCs (Engineered Cementitious Composites) to self-consolidating and shotcreting processes, KSCE Journal of Civil Engineering, 14, 743-751.DOI
17 
Li, V. C., and Leung, C. K. (1992), Steady-state and multiple cracking of short random fiber composites, Journal of Engineering Mechanics, 118(11), 2246-2264.DOI
18 
Li, V. C. (1993). From micromechanics to structural engineering- the design of cementitous composites for civil engineering applications, Japan Society of Civil Engineers, 10(2), 37-48.URL
19 
Kim, Y.Y. (2007), Design and Constructibility of an Engineered Cementitious Composite Produced with Cement-based Mortar Matrix and Synthetic Fibers, Composites Research, 20(2), 21-26.DOI
20 
Kim, J. S., Kim, Y. Y., and Kim, J. K. (2007), Diverse application of ECC designed with ground granulated blast furnace slag, International Journal of Concrete Structures and Materials, 1(1), 11-18.DOI
21 
Kim, H. J., Lee, B. H., and Kim, Y. Y. (2023), Material Properties of 3D Printed Mortars Produced with Synthetic Fibers and Biopolymers, Journal of the Korea Institute for Structural Maintenance and Inspection, 27(4), 78-85.DOI