Mobile QR Code QR CODE

“JSTS has been indexed and abstracted in the SCIE (Science Citation Index Expanded) since Volume 9, Issue 1 in 2009. Furthermore, it continues to maintain its listing in the SCOPUS database and is recognized as a regular journal by the Korea Research Foundation.

※ The user interface design of www.jsts.org has been recently revised and updated. Please contact inter@theieie.org for any inquiries regarding paper submission.

Journal Search

  1. Home
  2. Archive
  3. 2021-12 (Vol.21 No.06)
  4. 10.5573/JSTS.2021.21.6.418
XML PDF INFO REF

REFERENCES

1 
Iqbal F., Din H., Lee B., 2019, Single Drive Multi-Axis Gyroscope with High Dynamic Range, High Linearity and Wide Bandwidth, Micromachines, Vol. 10DOI
2 
Iqbal F., Shah M. A., Lee B., 2017, Analysis of parasitic feed-through capacitance in MEMS gyroscope with push pull configuration, IEEE 12th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), pp. 414-417DOI
3 
Walther A., Le Blanc C., Delorme N., Deimerly Y., Anciant R., Willemin J., 2012, Bias contributions in a MEMS tuning fork gyroscope, Journal of microelectromechanical systems, Vol. 22, No. 22, pp. 303-308DOI
4 
Iqbal F., Lee B., 2018, A Study on Measurement Variations in Resonant Characteristics of Electrostatically Actuated MEMS Resonators, Micromachines, p. 173, Vol. 9DOI
5 
Roessig T.-A. W., 1999, Integrated MEMS tuning fork oscillators for sensor applications, 1999.Google Search
6 
Zotov S. A., Simon B. R., Prikhodko I. P., Trusov A. A., Shkel A. M., 2014, Quality factor maximization through dynamic balancing of tuning fork resonator, IEEE Sensors Journal, Vol. 14, pp. 2706-2714DOI
7 
Janioud P., Koumela A., Poulain C., Rey P., Berthelot A., Morfouli P., 2017, Tuning the Anti-Phase Mode Sensitivity to Vibrations of a MEMS Gyroscope, in Multidisciplinary Digital Publishing Institute Proceedings, p. 355DOI
8 
Azgin K., Temiz Y., Akin T., 2007, An SOI-MEMS tuning fork gyroscope with linearly coupled drive mechanism, IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS), Vol. , No. , pp. 607-610DOI
9 
Gao Y., Li H., Huang L., Sun H., 2017, A lever coupling mechanism in dual-mass micro-gyroscopes for improving the shock resistance along the driving direction, Sensors, p. 995, Vol. 17DOI
10 
Thakur P. S., Sugano K., Tsuchiya T., Tabata O., 2014, Experimental verification of frequency decoupling effect on acceleration sensitivity in tuning fork gyroscopes using in-plane coupled resonators, Microsystem technologies, Vol. 20, pp. 403-411DOI
11 
Yoon S. W., Lee S., Najafi K., 2012, Vibration-induced errors in MEMS tuning fork gyroscopes, Sensors and Actuators A: Physical, Vol. 180, pp. 32-44DOI
12 
Koumela A., Poulain C., Le Goc C., Verdot T., Joet L., Rey P., 2016, Resilience to vibration of a tuning fork MEMS gyroscope, Procedia Engineering, Vol. 168, pp. 1725-1730DOI
13 
Guan Y., Gao S., Liu H., Niu; S., 2015, Acceleration sensitivity of tuning fork gyroscopes: Theoretical model, simulation and experimental verification, Microsystem Technologies, Vol. 21, pp. 1313-1323DOI
14 
Giacci F., Dellea S., Langfelder; G., 2017, Signal integrity in capacitive and piezoresistive single-and multi-axis MEMS gyroscopes under vibrations, Microelectronics Reliability, Vol. 75, pp. 59-68DOI
15 
Singh T. P., Sugano K., Tsuchiya T., Tabata; O., 2012, Frequency response of in-plane coupled resonators for investigating the acceleration sensitivity of MEMS tuning fork gyroscopes, Microsystem technologies, Vol. 18, pp. 797-803DOI
16 
Trusov A., Schofield A., Shkel A., 2009, Gyroscope architecture with structurally forced anti-phase drive-mode and linearly coupled anti-phase sense-mode, in TRANSDUCERS 2009-2009 Inter-national Solid-State Sensors, Actuators and Microsystems Conference, pp. 660-663DOI
17 
Trusov A. A., Schofield A. R., Shkel; A. M., 2011, Micromachined rate gyroscope architecture with ultra-high quality factor and improved mode ordering, Sensors and Actuators A: Physical, Vol. 165, pp. 26-34DOI
18 
Din H., Iqbal F., Lee; B., 2020, Modelling and optimization of single drive 3-axis MEMS gyroscope, Microsystem Technologies, pp. 1-9DOI
19 
Guan Y., Gao S., Liu H., Jin L., Niu; S., 2016, Design and vibration sensitivity analysis of a MEMS tuning fork gyroscope with an anchored diamond coupling mechanism, Sensors, p. 468, Vol. 16DOI
20 
Guan Y., Gao S., Jin L., Cao; L., 2016, Design and vibration sensitivity of a MEMS tuning fork gyroscope with anchored coupling mechanism, Microsystem Technologies, Vol. 22, pp. 247-254DOI
21 
Sharma A., Zaman F. M., Amini B. V., Ayazi; F., 2004, A high-Q in-plane SOI tuning fork gyroscope, in SENSORS, IEEE, Vol. 2004 ieee, pp. 467-470DOI
22 
Trinh T. Q., Nguyen L. Q., Dao D. V., Chu H. M., Vu; H. N., 2014, Design and analysis of a z-axis tuning fork gyroscope with guided-mechanical coupling, Microsystem technologies, Vol. 20, pp. 281-289DOI
23 
Xu Q., Hou Z., Kuang Y., Miao T., Ou F., Zhuo M., 2019, A tuning fork gyroscope with a polygon-shaped vibration beam, Micromachines, p. 813, Vol. 10DOI