Mobile QR Code QR CODE : Korean Journal of Air-Conditioning and Refrigeration Engineering
Korean Journal of Air-Conditioning and Refrigeration Engineering

Korean Journal of Air-Conditioning and Refrigeration Engineering

ISO Journal TitleKorean J. Air-Cond. Refrig. Eng.
  • Open Access, Monthly
Open Access Monthly
  • ISSN : 1229-6422 (Print)
  • ISSN : 2465-7611 (Online)
Online Submission

Journal Search

  1. Home
  2. Archive
  3. 2019-07 (Vol.31 No.07)
  4. 10.6110/KJACR.2019.31.7.289
XML PDF INFO REF

References

1 
2017. 12., Automotive reportGoogle Search
2 
Choi J. W., Lim J. T., Kim H. J., 2018, An Analysis of the Performance of a Combined Expander-Compressor Unit for a CO2 Air Conditioning Cycle, Korean J. of Air-Conditioning and Refrigeration Engineering, Vol. 30, No. 3, pp. 107-115DOI
3 
Beeton W. L., Pham H. M., 2003, Vapor-injected scroll compressor, ASHRAE Journal, Vol. 45, pp. 22-27Google Search
4 
Ma G., Li X., 2007, Exergetic optimization of a key design parameter in heat pump systems with economizer coupled with scroll compressor, Energy Conversion and Management, Vol. 48, pp. 1150-1159DOI
5 
Wang B., Shi W., Li X., Yan Q., 2008, Numerical research on the scroll compressor with refrigeration injection, Applied Thermal Engineering, Vol. 28, No. 5, pp. 440-449DOI
6 
Wang B., Shi W., Li X., 2009, Numerical analysis on the effects of refrigerant injection on the scroll compressor, Applied Thermal Engineering, Vol. 29, No. 1, pp. 37-46DOI
7 
Wang B., Shi W., Han L., Li X., 2009, Optimization of refrigeration system with gasinjected scroll compressor, Int. J. Refrig., Vol. 32, No. , pp. 1544-1554DOI
8 
Kwon C., Kim M. S., Choi Y., Kim M. S., 2017, Performance evaluation of a vapor injection heat pump system for electric vehicles, Int. J. Refrig., Vol. 74, pp. 138-150DOI
9 
Choi Y. U., Kim M. S., Kim G. T., Kim M., Kim M. S., 2017, Performance analysis of vaporinjection heat pump system for electric vehicle in cold startup condition, Int. J. Refrig., Vol. 80, pp. 24-36DOI
10 
Qin F., Zhang G. Y., Xue Q. F., Zou H. M., Tian C. Q., 2017, Experimental investigation and theoretical analysis of heat pump systems with two different injection portholes compressors for electric vehicles, Applied Energy, Vol. 185, pp. 2085-2093DOI
11 
Kim Y. H., Kim H. J., 2015, Design of Gas-Injection Port of an Asymmetric Scroll Compressor for Heat Pump Systems, Korean J. of Air-Conditioning and Refrigeration Engineering, Vol. 27, No. 6, pp. 300-306DOI
12 
Kim D. W., Chung H. J., Jeon Y. S., Jang D. S., Kim Y. C., 2017, Optimization of the injection-port geometries of a vapor injection scroll compressor based on SCOP under various climatic conditions, Energy, Vol. 135, pp. 442-454DOI
13 
Cho I. Y., Ko S. B., Kim Y., 2012, Optimization of injection holes in symmetric and asymmetric scroll compressors with vapor injection, Int. J. Refrig., Vol. 35, pp. 850-860DOI
14 
Kim D. W., Jeon Y. S., Jang D. S., Kim Y. C., 2018, Performance comparison among two-phase, liquid, and vapor injection heat pumps with a scroll compressor using R410A, Applied Thermal Engineering, Vol. 137, pp. 193-202DOI
15 
Xing X., Hwang Y. H., Reinhard Radermacher , 2011, Refrigerant injection for heat pumping/air conditioning systems, Literature Review and Challenges Discussions, International Journal of Refrigeration, Vol. 34, pp. 402-415DOI
16 
Kwon T. H., Ahn J. M., Kim H. J., Shim J. H., 2008, Conceptual Design of the Scroll Air Compressor for Fuel Cell, Korean J. of Air-Conditioning and Refrigeration Engineering, Vol. 20, No. 2, pp. 113-120Google Search
17 
Ishii N., Oku T., Anami K., Knisely C., Sawai K., Morimoto T., Iida N., 2008, Optimal Performance Design Guidelines for Thrust Slide-Bearings in Scroll Compressors for Maximum Efficiency, International Compressor Engineering Conference at Purdue, C1428.Google Search
18 
NTN corporation , 2003, Rolling bearing catalogue, NTN corporation.Google Search