Mobile QR Code QR CODE : Journal of the Korean Institute of Illuminating and Electrical Installation Engineers

Journal of the Korean Institute of Illuminating and Electrical Installation Engineers

ISO Journal TitleJ Korean Inst. IIIum. Electr. Install. Eng.
Online Submission

Journal Search

  1. Home
  2. Archive
  3. 2024-04 (Vol.38 No.2)
  4. 10.5207/JIEIE.2024.38.2.083
XML PDF INFO REF

References

1 
C. H. Lee, S. W. Jee, and S. K. Kim, “A study on the explosion hazard by spark discharge of the Lithium-ion battery,” Journal of the Korean Institute of Gas, vol. 14, no. 3, pp. 14-20, 2010.URL
2 
S. H. Kim, “Battery loss analysis according to Li-ion battery SOC,” in Proceedings of KIIEE Annual Conference, pp. 48-48, 2017.URL
3 
S. H. Kim, D. H. Kim, and J. S. Hong, “Thermal-flow analysis for Lithium-ion battery module considering electrochemical thermal behavior of unit cell,” Korean Society of Mechanical Engineers Spring and Autumn Conference, pp. 650-652, 2018.URL
4 
G. S. YOO, “Analysis of lithium battery thermal behavior through multiphysics analysis of mechanical-electrochemical- heat transfer,” Auto Journal, vol. 42, no. 10, pp. 16-21, 2020.URL
5 
D. H. Kim, S. H. Kim, and J. S. Hong. “Thermal modeling of pouch-type Lithium-ion battery considering electrochemical characteristics,” Korean Society of Mechanical Engineers Spring and Autumn Conference, pp. 596-597, 2018.URL
6 
J. H. Choi, et al., “Study on power characteristics of electric driving motor by Pb and Lithium battery,” Korean Society of Automotive Engineers Spring Conference, pp. 2367-2370, 2011.URL
7 
C. E. Park, S. W. Yoo, Y. H. Jeong, and K. B. Kim, “Effect of thermal management of Lithium-ion battery on driving range of electric vehicle,” Journal of the Korea Academia-Industrial cooperation Society, vol. 18, no. 5, pp. 22-28, 2017.DOI
8 
J. W. Yang, W. C. Kim, J. W. Shim, and K. Hur, “Study on charging methodology to enhance efficiency of Li-ion battery ESS,” in Proceedings of the Korean Institute of Electrical Engineers conference, pp. 312-314, 2013.URL
9 
S. H. Jeong and K. H. Lee, “A study on the mechanism of automatic blister packaging for Lithium battery,” in Proceedings of the KSMPE Conference, pp. 203-206, 2004.URL
10 
H. S. Kim, D. Y. Koo, S. Y. Lee, and S. C. Hong, “A study on the efficiency of DC-DC converter to charge and discharge Lithium battery,” Power Electronics Conference, pp. 205-206, 2010.URL
11 
D. C. Lee, J. H. Byeon, S. M. Song, and C. W. Kim, “Mechanical-electrochemical-thermal multiphysics modeling of multi-layered Li-ion batteries for thermal runaway analysis by internal short-circuit under indentation conditions,” Korean Society of Mechanical Engineers Spring and Autumn Conference, pp. 3064-3065, 2018.URL
12 
G. T. Park, et al., “Development and performance test of battery short test for certificating intrinsically safety explosion-proof,” Korean Society of Mechanical Engineers Spring and Autumn Conference, pp. 63-65, 2016.URL
13 
K. S. Yoo, “Study for a heat generation phenomena in Li-ion battery based on multiphysics analysis,” Korean Society of Mechanical Engineers Spring and Autumn Conference, pp. 19-19, 2020.URL
14 
S. H. Lee, et al., “Failure analysis of a failed lithium-ion battery by external impact,” Korean Analytical Science Society Conference, pp. 45-45, 2016.URL
15 
E. P. Hong, Y. Heo, K. T. Nam, and M. S. Mun, “A study on the performance comparison of Lithium battery for powered wheelchair,” Korean Society of Precision Engineers Spring Academic Conference, pp. 947-948, 2015.URL
16 
C. H. Lee, “Explosion-proof electrical equipment to prevent gas explosion accidents,” Journal of the Korean Institute of Gas, vol. 1, no. 1, pp. 23-29, 1977.URL
17 
C. S. Cho and Y. H. Jeong, “An analysis of problems in accreditation process for Flameproof Enclosure type Electric Equipment,” Korean Institute of Electrical Engineers Electrical Equipment Section Spring Conference, pp. 167- 169, 2012.URL
18 
C. S. Min, “A study on the electrical facilities design with explosion proof,” Korean Institute of Electrical Engineers conference, pp. 84-89, 2016.URL
19 
U. N. Son, S. M. Son, S. K. Lee, and G. H. Kang, “Study on the characteristics of explosion pressure based on the internal structure of a cylindrical enclosure,” Journal of Advanced Marine Engineering and Technology, vol. 43, no. 3, pp. 204-211, 2019.URL
20 
C. S. Cho, “A study for certification approval procedure of flameproof enclosure “d” of low-voltage electric facility,” in Proceedings of KIIEE Annual Conference, pp. 171-175, 2011.URL
21 
H. S. Kim, D. T. Chung, and S. C. Hong, “Design of DC-DC converter to charge and discharge Lithium battery using isolated boost converter and forward converter,” The Transactions of the Korean Institute of Power Electronics, vol. 15, no. 6, pp. 441-450, 2010.DOI
22 
S. H. Kim, G. D. Jung, T. S. Kim, and H. J. Kim, “Fuel efficiency improvement through technical development of The vehicle operationg ISG 12/48V Lithium-ion Battery,” Korean Society of Automotive Engineers Fall Conference, pp. 1,280-1,285, 2017.URL
23 
W. H. Lee and S. G. Choi, “Preventing explosions of electrical machines and appliances,” The Korean Institute of Electrical Engineers, vol. 42, no. 2, pp. 48-59, 1993.URL
24 
K. Y. Hwang, W. C Shin, and T. K. Lee, “A study on the correlation of MESG and explosion pressure,” Journal of the Korean Institute of Gas, vol. 20, no. 1, pp. 29-39, 2016.DOI
25 
C. H. Lee, S. W. Jee, and S. K. Kim, “The intrinsic safety evaluation of solar photovoltaic cell,” Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, vol. 25, no. 7, pp. 49-54, 2011.URL