X. Hu, et al., “Analysis of local burnout in a sub-scale test coil for the 32 T magnet after spontaneous quenches during fast ramping,” Superconductor Science and Technology, vol. 35, no. 7, 2022.

T. Oki. et al., “Evaluation on quench protection for no- insulation REBCO pancake coil,” in IEEE Transactions on Applied Superconductivity, vol. 26, no. 4, pp. 1-5, 2016.

S. Han, et al., “Charging characteristics of series connected insulation and no-insulation HTS coils by rotary HTS flux pump,” in IEEE Transactions on Applied Superconductivity, vol. 30, no. 4, pp. 1-5, 2020.

S. Noguchi, et al., “Numerical investigation of metal insulation technique on turn-to-turn contact resistance of REBCO pancake coils,” in IEEE Transactions on Applied Superconductivity, vol. 27, no. 4, pp. 1-5, 2017.

M. Bonura, et al., “Contact resistance between REBCO coated conductors in the presence of a V2O3 inter-layer,” in IEEE Transactions on Applied Superconductivity, vol. 33, no. 5, pp. 1-6, 2023.

T. Lécrevisse and Y. Iwasa, “A (RE)BCO pancake winding with metal-as-insulation,” in IEEE Transactions on Applied Superconductivity, vol. 26, no. 3, pp. 1-5, 2016.

Jun Lu, et al., “Contact resistance between two REBCO tapes under load and load cycles,” Superconductor Science and Technology, vol. 30, no. 4, 2017.

Y. Seino, et al., “Joint resistance characteristics of mechanical lap joint of a GdBCO tape with a change in temperature and magnetic field,” in IEEE Transactions on Applied Superconductivity, vol. 24, no. 3, pp. 1-5, 2014.

L. Biele, et al., “Influence of contact pressure on the specific electrical contact resistance of copper,” in IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 12, no. 6, pp. 973-980, 2022.

M. Bonura, et al., “Systematic study of the contact resistance between REBCO tapes: Pressure dependence in the case of no-insulation, metal co-winding and metal-insulation,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, 2019.