Mobile QR Code QR CODE : Journal of the Korean Institute of Illuminating and Electrical Installation Engineers

Journal of the Korean Institute of Illuminating and Electrical Installation Engineers

ISO Journal TitleJ Korean Inst. IIIum. Electr. Install. Eng.
Online Submission

Journal Search

  1. Home
  2. Archive
  3. 2025-06 (Vol.39 No.3)
  4. 10.5207/JIEIE.2025.39.3.167
XML PDF INFO REF

References

1 
Ingo Sieber, Horst Eggert, Helmut Guth, and Wilfried Jakob, “Design simulation and optimization of micro-optical components,” SPIE, vol. 3430, 1998.DOI
2 
S. Andradottir, “A review of simulation optimization techniques,” in Proc. of 1998 winter simulation conference (Cat. No. 98CH36274), vol. 1, pp. 151-158, 1998.DOI
3 
J.P.C. Kleijnen, “Experimental design for sensitivity analysis, optimization and validation of simulation models,” Operations research, pp. 1-25, 1997.URL
4 
M. Luo, et al., “Efficient lens design enabled by a multilayer perceptron-based machine learning scheme,” Optik, vol. 273, 2023.DOI
5 
Herlina, Randa Adriano, and Rudy Setiabudy, “The Mapping of Lighting Intensity from the Light Distribution on LED and CFL Lamps,” in Proc. of 2019 4th ICITISEE, pp. 429-434, 2019.DOI
6 
Ron Lenk and Carol Lenk, “Practical lighting design with LEDs,” John Wiley & Sons, 2nd Ed., 2017.URL
7 
J. H. Lee, K. B. Nahm, J. H. Ko, and J. H. Kim, “Optimization of optical structure of lightguide panel for uniformity improvement of edge-lit backlight,” Korean Journal of Optics and Photonics, vol. 21, no. 2, pp. 61-68, 2010.DOI
8 
Bo Mei and Han Long, “Research on chaotic characteristics of array LED light system,” in Proc. of International Conference on Frontiers of Electronics, Information and Computation Technologies, vol. 121, pp. 1-6, 2021.DOI
9 
H. Wu, et al., “Design of a freeform reflector for LED sources based on a feedback method,” Lighting Research & Technology, vol. 48, no. 3, pp. 365-375, 2016.DOI
10 
L. B. Romijn, Jan H.M. ten Thije Boonkkamp, and W. L. IJzerman, “Inverse reflector design for a point source and far-field target,” Journal of Computational Physics, vol. 408, 2020.DOI
11 
Kreyszig Erwin, “Advanced engineering mathematics,” John Wiley & Sons, 8th Ed., 1998.URL
12 
S. K. Lee and C. G. Lee, “A study on equations of bisector and trisectors of angle,” Communications of Mathematical Education, vol. 21, no. 3, pp. 515-525, 2007.URL
13 
C. Wang, et al., “Efficiency improvement of batch reactors for water sterilization using UV-C LED arrays,” Environmental Technology, vol. 42, no. 25, pp. 4038-4046, 2021.DOI
14 
Y. X. Cui, “Study and development of near-infrared reflective and absorptive materials for energy saving application,” Ph.D. Thesis, Chemistry, Carleton University, 2012.URL
15 
Theodore V. Vorburger, Egon Marx, and Thomas R. Lettieri, “Regimes of surface roughness measurable with light scattering,” Applied optics, vol. 32, no. 19, pp. 3401-3408, 1993.DOI
16 
John C. Stover, “Optical scattering: Measurement and analysis,” SPIE Press, 3rd Ed., 1999.URL
17 
Rosana Montes and Carlos Ureña, “An overview of BRDF models,” University of Grenada, Technical Report LSI-2012-001, 2012.URL
18 
H. Zhang, Z. Wu, Y. Cao, and G. Zhang, “Measurement and statistical modeling of BRDF of various samples,” Optica applicata, vol. 40, no. 1, pp. 197-208, 2010.URL
19 
Maria Brogren, et al., “Optical properties, durability, and system aspects of a new aluminium-polymer-laminated steel reflector for solar concentrators,” Solar Energy Materials and Solar Cells, vol. 82, no. 3, pp. 387-412, 2004.DOI
20 
J. W. Ahn, K. H. Choi, and U. C. Ryu, “Designing bottom reflector for UV-C LED for HEPA filter sterilization,” in Proc. of 2024 spring Conference of KIIEE, pp. 50, 2024.URL
21 
S. H. Park, “Design of Experiments,” MinYoungSa, 2nd Ed., pp. 305-338, 2012.URL