Mobile QR Code QR CODE : Journal of the Korean Institute of Illuminating and Electrical Installation Engineers

Journal of the Korean Institute of Illuminating and Electrical Installation Engineers

ISO Journal TitleJ Korean Inst. IIIum. Electr. Install. Eng.
Online Submission

Journal Search

  1. Home
  2. Archive
  3. 2021-02 (Vol.35 No.02)
  4. 10.5207/JIEIE.2021.35.2.042
XML PDF INFO REF

References

1 
Rao Y., Wang Y., Ran Z., Zhu T., 2003, Novel fiber-optic sensors based on long-period fiber gratings written by high-frequency $CO_{2}$ laser pulses, J Lightwave Technol, Vol. 21, No. 5, pp. 1320-1327Google Search
2 
Slavík R., 2006, Extremely deep long-period fiber grating made with $CO_{2}$ laser, IEEE Photonics Technol Lett, Vol. 18, No. 16, pp. 1705-1707DOI
3 
Chan F., Chiang K., 2005, Analysis of apodized phase-shifted long-period fiber gratings, Opt Commun, Vol. 244, No. 1-6, pp. 233-243DOI
4 
Zhou X., Shi S., Zhang Z., Zou J., Liu Y., 2011, Mechanically-induced π-shifted long-period fiber gratings, Opt Express, Vol. 19, No. 7, pp. 6253-6259DOI
5 
Bakhti F., Sansonetti P., 1997, Design and realization of multiple quarter-wave phase-shifts UV-written bandpass filters in optical fibers, J Lightwave Technol, Vol. 15, No. 8, pp. 1433-1437DOI
6 
Turitsyna E., Webb S., 2005, Simple design of FBG-based VSB filters for ultra-dense WDM transmission, Electron Lett, Vol. 41, No. 2, pp. 40-41Google Search
7 
Gu Y., Chiang K., Rao Y., 2009, Writing of apodized phase-shifted long-period fiber gratings with a computer-controlled $CO_{2}$ laser, IEEE Photonics Technol Lett, Vol. 21, No. 10, pp. 657-659DOI
8 
Han Y. G., Lee J. H., Lee S. B., 2004, Discrimination of bending and temperature sensitivities with phase-shifted long-period fiber gratings depending on initial coupling strength, Opt Express, Vol. 12, No. 14, pp. 3204-3208DOI
9 
Liu Y., Zhang L., Williams J., Bennion I., 2000, Optical bend sensor based on measurement of resonance mode splitting of long-period fiber grating, IEEE Photonics Technol Lett, Vol. 12, No. 5, pp. 531-533DOI
10 
Yang W., 2015, A phase-shifted long period fiber grating based on filament heating method for simultaneous measurement of strain and temperature, J Opt, Vol. 17, No. 7, pp. 075801Google Search
11 
Gao R., Jiang Y., Jiang L., 2014, Multi-phase-shifted helical long period fiber grating based temperature-insensitive optical twist sensor, Opt Express, Vol. 22, No. 13, pp. 15697-15709DOI
12 
Dey T. K., Biswas P., Basumallick N., Bandyopadhyay Som., Bandyopadhyay S., 2017, Realization of long period fiber grating in reflection mode operating near turn around point, IEEE Sens J, Vol. 17, No. 13, pp. 4100-4106DOI
13 
Geng T., 2016, Modal interferometer using three-core fiber for simultaneous measurement strain and temperature, IEEE Photonics Technol Lett, Vol. 8, No. 4, pp. 1-8DOI
14 
Ye C. C., James S. W., Tatam R. P., 2000, Simultaneous temperature and bend sensing with long-period fiber gratings, Opt Lett, Vol. 25, No. 14, pp. 1007-1009DOI
15 
Yin G., 2015, Simultaneous refractive index and temperature measurement with LPFG and liquid-filled PCF, IEEE Photonics Technol Lett, Vol. 27, No. 4, pp. 375-378DOI
16 
Zheng S., Zhu Y., 2015, Photonic crystal fiber π-phase-shifted long-period gratings with wide bandpass and temperature insensitivity, Opt Eng, Vol. 54, No. 11, pp. 116101DOI
17 
Wang P., Xian L., Li H., 2015, Fabrication of phase-shifted long-period fiber grating and its application to strain measurement, IEEE Photonics Technol Lett, Vol. 27, No. 5, pp. 557-560DOI
18 
Hishiki K., Li H., 2013, Phase-shift formed in a long period fiber grating and its application to the measurements of temperature and refractive index, Opt Express, Vol. 21, No. 10, pp. 11901-11912DOI
19 
Zhang L., Liu Y., Zhao Y., Wang T., 2016, High sensitivity twist sensor based on helical long-period grating written in two-mode fiber, IEEE Photonics Technol Lett, Vol. 28, No. 15, pp. 1629-1632DOI
20 
Singh A., Engles D., Sharma A., Singh M., 2014, Temperature sensitivity of long period fiber grating in SMF-28 fiber, Optik, Vol. 125, No. 1, pp. 457-460DOI