F. Lu, et al., “A tightly coupled inductive power transfer system for low-voltage and high-current charging of automatic guided vehicles,” in IEEE Transactions on Industrial Electronics, vol. 66, no. 9, pp. 6867-6875, 2019.

H. Matsumoto, R. Noborikawa, T. Zaitsu, and Y. Shibako, “Wireless power transfer system with passive boost topology for AGVs,” in IEEE Open Journal of Industry Applications, vol. 1, pp. 227-235, 2020.

P. -Y. Kong, “Extending energy storage lifetime of autonomous robot-like mobile charger for electric vehicles,” in IEEE Access, vol. 8, pp. 106811-106821, 2020.

M. Behl, et al., “Autonomous Electric Vehicle Charging System,” in Proc. of SIEDS, pp. 1-6, 2019.

Yu-Jin Moon, et al., “Wireless power charging system capable of soft-switching operation even in wide air gaps,” The Transactions of the Korean Institute of Power Electronics, vol. 27, no. 6, pp. 515-525, 2022.

A. Zaheer, H. Hao, G. A. Covic, and D. Kacprzak, “Investigation of multiple decoupled coil primary pad topologies in lumped IPT systems for interoperable electric vehicle charging,” in IEEE Transactions on Power Electronics, vol. 30, no. 4, pp. 1937-1955, 2015.

M. Budhia, J. Boys, G. Covic, and C.-Y. Huang, “Development of a single-sided flux magnetic coupler for electric vehicle IPT charging systems,” in IEEE Transactions on Industrial Electronics, vol. 60, no. 1, pp. 318-328, 2013.

F. Lin, G. Covic, and J. Boys, “Evaluation of magnetic pad sizes and topologies for electric vehicle charging,” in IEEE Transactions on Power Electronics, vol. 30, no. 11, pp. 6391-6407, 2015.

D.-H. Sim, et al., “Receiving pad identification coil for wireless charging of electric vehicle,” The Transactions of the Korean Institute of Power Electronics, vol. 27, no. 6, pp. 455-463, 2022.

S. -H. Ryu, C. -T. Truong, and S. -J. Choi, “Coil design scheme using single-turn FEM simulation for efficiency optimization of inductive power transfer system,” The Transactions of the Korean Institute of Power Electronics, vol. 27, no. 6, pp. 471-480, 2022.

H. Kim, et al., “Coil design and measurements of automotive magnetic resonant wireless charging system for high-efficiency and low magnetic field leakage,” in IEEE Transactions on Microwave Theory and Techniques, vol. 64, no. 2, pp. 383-400, 2016.

J. Cho, et al., “Coil design for 100 KHz and 6.78 MHz WPT system : Litz and solid wires and winding methods,” in Proc. of IEEE International Symposium on Electromagnetic Compatibility & Signal/Power Integrity (EMCSI), pp. 803-806, 2017.