Mobile QR Code QR CODE : Journal of the Korean Institute of Illuminating and Electrical Installation Engineers

Journal of the Korean Institute of Illuminating and Electrical Installation Engineers

ISO Journal TitleJ Korean Inst. IIIum. Electr. Install. Eng.
Online Submission

Journal Search

  1. Home
  2. Archive
  3. 2023-12 (Vol.37 No.6)
  4. 10.5207/JIEIE.2023.37.6.001
XML PDF INFO REF

References

1 
J. Haq, B. D. Vogt, G. B. Raupp, and D. Loy, “Finite element modeling of temporary bonding systems for flexible microelectronics fabrication,” Microelectronic Engineering, vol. 94, pp. 18-25, 2012.DOI
2 
H. Khachatryana, K. B. Kim, and M. J. Kim, “CH3NH3PbI3-based perovskite material patterning and thin-film transistor fabrication,” Applied Science Convergence Technology, vol. 31, no. 1, pp. 23-27, 2022.DOI
3 
M. Kuriakose, C. D. Nguyen, M. K. A. Singh, and M. S. Mallidi,“Optimizing irradiation geometry in LED-based photoacoustic imaging with 3D printed flexible and modular light delivery system,” Sensors, vol.20, no. 13, p. 3789, 2020.DOI
4 
M. Yoon, “Threshold-voltage extraction methods for atomically deposited disordered ZnO thin-film transistors,” Materials, vol. 16, no. 8, p. 2940, 2023.DOI
5 
J. I. Lee, et al.,“3D contact position estimation of image-based areal soft tactile sensor with printed array markers and image sensors,” Sensors, vol.20, no. 13, p. 3796, 2020.DOI
6 
H. Aparicio and P. Ituero, “A 900μm2 BiCMOS temperature sensor for dynamic thermal management,” Sensors, vol.20, no. 13, p. 3725, 2020.DOI
7 
J. Jang, et al., “Motion detection using tactile sensors based on pressure-sensitive transistor arrays,” Sensors, vol. 20, no. 13, p. 3624, 2020.DOI
8 
C. Chun, K. M. Jeon, and W. Choi, “Configuration-invariant sound localization technique using azimuth-frequency representation and convolutional neural networks,” Sensors, vol.20, no. 13, p. 3768, 2020.DOI
9 
A. N. Thiessen, et al., “Silicon aanoparticles: are they crystalline from the core to the surface?,” Chemistry of Materials, vol. 31, no. 3, pp. 678-688, 2019.DOI
10 
G. Signorello, et al., “Inducing a direct-to-pseudodirect bandgap transition in wurtzite GaAs nanowires with uniaxial stress,” Nature Communications, vol. 10, no. 5, p. 3655, 2014.DOI
11 
K. Shiojima,M. Maeda, and K. Kurihara, “Mapping of n-GaN Schottky contacts formed on facet-growth substrates using near-ultraviolet scanning internal photoemission microscopy,” Semiconductor Science and Technology, vol.36,no. 3, p. 034007, 2021.DOI
12 
M. J. Kim and G. H. Jin, “ITO/AlNdN/Al contact process for active matrix OLED displays,” Electronics letters, vol. 45, no. 8, pp. 421-423, 2009.DOI
13 
D. Arl, et al., “SiO2 thin film growth through a pure atomic layer deposition technique at room temperature,” RSC Advances, vol. 10, pp. 18073-18081, 2020.DOI
14 
M. D. Groner, F. H. Fabreguette, J. W. Elam, and S. M. George, “Low-temperature Al2O3 atomic layer deposition,” Chemistry of Materials, vol. 16, pp. 639-645, 2004.DOI
15 
H. Khachatryana, et al., “Al thin film: The effect of substrate type on Al film formation and morphology,” Journal of Physics and Chemistry of Solids, vol. 122, pp. 109-117, 2018.DOI
16 
K. B. Kim, “Ti deposition using atmospheric pressure plasma technology,” Journal of Convergence for Information Technology, vol. 12, no. 2, pp. 149-156, 2022.DOI
17 
M. Fazio, et al., “Study of the structure of titanium thin films deposited with a vacuumarc as a function of the thickness,” Thin Solid Films, vol. 593, pp. 110-115, 2015.DOI